Abstract:The Pancharatnam–Berry (PB)-phase liquid crystal (LC) planar optical elements, featuring large apertures and a light weight, are emerging as the new generation optics. The primary method for fabricating large-aperture LC planar optical elements is through photo-alignment, utilizing polarization laser direct writing. However, conventional polarization direct writing suffers from an inertia-induced stopping step during splicing, leading to suboptimal optical effects. Here, we propose a novel highly efficient method for arbitrary polarization patterning, significantly reducing interface splicing errors in these optical elements. (We call it dynamic polarization patterning technology). This process involves simultaneous mobile splicing and real-time generation of different polarization patterns for exposure, eliminating the inertia-related splicing interruption. As a demonstration, we fabricated a lens with an aperture of approximately 1 cm within 30 min at 633 nm. Furthermore, we developed a 100% fill-factor lens array (3 × 3) with an element lens diameter of approximately 7 mm within 1.5 h at 532 nm. Their focal lengths were uniformly set at 30 cm, demonstrating superior convergence capabilities within their designated working wavelengths, alongside commendable performance in converging light across various other wavelengths. Our measurements confirmed the good focusing performance of these samples. The convergence spot size of the lens deviated by approximately 40% from the theoretical diffraction limit, whereas the lens array exhibited a deviation of around 30%. The dynamic polarization direct writing during uniform platform movement reduced splicing errors to a mere 100–200 nm. The enhancement in imaging quality can be primarily attributed to the innovative use of mobile polarization splicing exposure technology, coupled with the inherent self-smoothing properties of LC molecules. This synergy significantly mitigates the impact of seam diffraction interference.

High-quality cutting polarizing film (POL) by 355 nm nanosecond laser ablation

High-quality cutting of polypropylene (PP) film by UV nanosecond laser based on thermal ablation

Cutting of polyethylene terephthalate (PET) film by 355 nm nanosecond laser

Precision cutting of PDMS film with UV-nanosecond laser based on heat generation-diffusion regulation

Precision cutting of polyvinyl chloride film by ultraviolet nanosecond laser

Thin-film polarizing beam splitters used in liquid crystal projection display

Investigation of laser marking technology with the image mask of liquid crystal display

Good-Quality and High-Efficiency Dicing for Thick LiNbO3 Wafers Using Picosecond Laser Pulses

Process and mechanism of cutting thermoplastic polyurethane (TPU) film by nanosecond ultraviolet laser

Research of Thin Film for Laser Polarization Beam Splitter

Polarization selective beam splitter used for liquid crystal light valve large screen display

A Low Diffraction Laser Beam As Applied to Polymer Ablation

Study on the ultraviolet nanosecond laser ablation and heat-affected zone of polydimethylsiloxane films based on comprehensive surface analysis

Study and fabrication of 1064nm laser flat polarizer

Deposition of Oriented Polymer Films for Liquid Crystal Alignment by Pulsed Laser Ablation

Composition conversion and parameters influence of nanosecond ultraviolet laser cutting polystyrene film

Nanosecond Laser Damage of 532 Nm Thin Film Polarizers Evaluated by Different Testing Protocols

High quality stealth dicing of sapphire with a picosecond Bessel beam by controlling the polarization direction

Balanced Electro-Optical Properties and Off-Axis Haze Performance of a Polymer-Dispersed Liquid Crystal Film Via Refractive Index Matching.

Polarization-dependent micro-structure fabrication with direct femtosecond laser writing on plastic polarizer films.

Dynamic Polarization Patterning Technique for High-Quality Liquid Crystal Planar Optics