Abstract:Glass fiber-reinforced polymer (GFRP) composites, with epoxy resin or a blend of cyanate and epoxy resins as the matrix, have been used as insulating materials of high-field, large-scale superconducting magnets for accelerators and magnetic confinement fusion. However, the GFRP does not fully meet the requirements for the next generation of magnetic confinement fusion with respect to the mechanical and thermal performance at cryogenic temperature and huge electromagnetic stress. This paper introduces a method for enhancing both the mechanical and thermal properties of the GFRP composites using aluminum nitride (AlN) nanoparticles. The fabrication of the AlN-GFRP composite involved a method that combines "dip absorption" with vacuum-assisted resin transfer molding (VARTM). The dip absorption method was utilized to deposit AlN nanopowders onto glass fibers, resulting in the preparation of AlN-glass fiber layers. Subsequently, the AlN-woven glass fibers were incorporated to reinforce the cyanate ester/epoxy based composites using the VARTM technology. The mechanical and thermal properties of the AlN-GFRP composites were assessed across varying temperatures. The results indicate that the short-beam shear strength (SBS strength) of the AlN-GFRP composites improves at cryogenic temperatures compared to that of the GFRP composites without AlN. Additionally, enhanced thermal conductivities are observed across different temperature ranges for the AlN-GFRP composites. The coefficient of thermal expansion between 77 K and 300 K of the composites significantly decreases with the addition of the AlN nanopowders.

Preparation of AlN micro-honeycombs with high permeability via freeze-casting

Preparation of AlN microspheres/UHMWPE composites for insulating thermal conductors

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Enhanced thermal conductivity of epoxy composites by constructing aluminum nitride honeycomb reinforcements

Microstructure Elaboration and Mechanical Properties of AlN P /4032al Composite

Preparation and properties of ultralight fibrous β-Si3N4 3D scaffolds with honeycomb-like structure by directional freeze-casting

Freeze-Casting of Alumina and Permeability Analysis Based on a 3D Microstructure Reconstructed Using Generative Adversarial Networks

Dispersion and Preparation of Nano-AlN/AA6061 Composites by Pressure Infiltration Method

Synthesis of Honeycomb-Like Structured Porous Si3n4 Ceramics with Exceptionally High Number of Cells Per Square Inch

Increasing the ductility of heat-resistant AlNp/Al composites by submicron Al2O3 particles

Effect of nitriding atmosphere on the morphology of AlN nanofibers from solution blow spinning

Optimizing AlN hydrolysis process to fabricate coated modified powders for improving the properties of Si 3 N 4 /SiAlON ceramics prepared by Vat Photopolymerization

Preparation of porous alumina ceramic with ultra-high porosity and long straight pores by freeze casting

Novel fabrication process of AlN ceramic matrix composites at low temperatures

Enhanced Thermal Conductivity of Epoxy Composites by Introducing 1D AlN Whiskers and Constructing Directionally Aligned 3D AlN Filler Skeletons

Transparent AlN ceramics sintered from nanopowders produced by the wet chemical method

High-Thermal-Conductivity AlN Ceramics Prepared from Octyltrichlorosilane-Modified AlN Powder

Hierarchically porous Al2TiO5 ceramics via freeze-gel casting

Fabrication of Porous Alumina Ceramics with Directional Pore Channels Structure by Freeze-Gel Casting Processing

Nano aluminum nitride fillers for enhanced mechanical and thermal properties of GFRP in cryogenic temperature settings

Optimization Of Non-Aqueous Tape Casting Of High Solid Loading Slurry For Aluminum Nitride Ceramic Substrates