Abstract:The non-oxide-reinforced phase AlN-SiC solid solution with high performance was successfully synthesized in the resin-bonded Al-Si-SiC composites under flowing nitrogen at 1300 °C. The AlN-SiC solid solution was synthesized by three paths of liquid-solid, gas-solid and gas-gas reactions through modulation of Al/Si ratio, and controllable microstructure of AlN-SiC solid solution was attained. The phase composition and microstructure of the sintered samples were characterized by XRD and SEM, combined with thermodynamics, the formation mechanism of AlN-SiC solid solution was investigated and the reaction model was established. Al was not detected while Si was detested by XRD. Granular, short columnar and whisker-like AlN-SiC solid solution were generated and their positions varied. As the temperature increases, the partial pressure of oxygen decreases due to the oxidation of Al, Si and SiC on the surface of the sample, inside the sample, the active oxidation takes place, generating Al2O(g), SiO(g) and CO(g). Due to the low oxygen partial pressure, Al is preferentially nitrided to form a thin AlN layer on its surface. The AlN layer is broken as the temperature increases, then liquid Al with carbon from resin begins to flow, leaving the residual shell of AlN in situ. When it flows to the surface of Si, Al-Sialloy is formed locally inside the Si particles under the wetting effect of C, then hexagonal AlN-SiC solid solution is formed inside the Si shell. Part of SiO(g) + CO(g) diffuses into the interior of the AlN residual shell and reacts by aggregation to form a granular AlN-SiC solid solution in the shell wall; others diffuses into the pores of the sample for vapor deposition, and finally forms stacked hexagonal flaky whiskers. The in-situ generated of AlN-SiC solid solution with multiple morphologies in the composite plays a joint toughening effect, which can significantly enhance the comprehensive performance of the composite. In this experiment, the synthesis of AlN-SiC solid solution without sintering aids under normal pressure at a low temperature. It is expected to be applied to the blast furnace and to realize the longevity of blast furnace.

Effect of nitriding atmosphere on the morphology of AlN nanofibers from solution blow spinning

Role of Nitrogen on the Mechanical Properties of the Novel Carbon Nitride Nanothreads

Improvement of Electrical and Material Properties of Epoxy Resin/aluminum Nitride Nanocomposites for Packaging Materials

Synthesis of aluminum nitride fibres from aluminum silicate fibres by carbothermal reduction method

Formation of aluminum nitride nanofibers using electrospinning and their application to thermal conductive sheets

Preparation of AlN microspheres/UHMWPE composites for insulating thermal conductors

Fabrication of Al-Ni nanofibers by selective etching

The Effects of Morphology and Temperature on the Tensile Characteristics of Carbon Nitride Nanothreads.

High-quality AlN growth: a detailed study on ammonia flow

Controlled synthesis of ultra-long AlN nanowires in different densities and in situ investigation of the physical properties of an individual AlN nanowire.

Nano aluminum nitride fillers for enhanced mechanical and thermal properties of GFRP in cryogenic temperature settings

Effect of carbon nanotube hybrid on the microstructure and properties of AlN skeleton-reinforced highly oriented graphite flake composites

Preparation and Characterization of InN Nanofibers

Effect of nitrogen flow ratio on the structure and optical properties of AlN film

Formation mechanism of AlN-SiC solid solution with multiple morphologies in Al-Si-SiC composites under flowing nitrogen at 1300 °C

Synthesis of Aluminum Nitride Nanowires from Carbon Nanotubes

Impacts of Temperature and Time on Direct Nitridation of Aluminium Powders for Preparation of AlN Reinforcement

Synthesis of AlN particles via direct nitridation in a drop tube furnace

Effect of AlN nanoparticle doping on thermophysical properties of nitrate via mechanical milling: Experimental studies and microscopic mechanisms

Morphology Evolution, Growth Mechanism and Optical Properties of AlN Nanostructures

Effect of Bi2o3 Addition on Structure and Magnetic Properties of Ni0.5zn0.5fe2o4 Nanofibers