Abstract:Cryogenic deep reactive ion etching (Cryo DRIE) of silicon has become an enticing but challenging process utilized in front-end fabrication for the semiconductor industry. This method, compared to the Bosch process, yields vertical etch profiles with smoother sidewalls not subjected to scalloping, which are desired for many microelectromechanical systems (MEMS) applications. Smoother sidewalls enhance electrical contact by ensuring more conformal and uniform sidewall coverage, thereby increasing the effective contact area without altering contact dimensions. The versatility of the Cryo DRIE process allows for customization of the etch profiles by adjusting key process parameters such as table temperature, O2 percentage of the total gas flow rate (O2 + SF6), RF bias power, and process pressure. In this work, we undertake a comprehensive study of the effects of Cryo DRIE process parameters on the trench profiles in the structures used to define cantilevers in MEMS devices. Experiments were performed with an Oxford PlasmaPro 100 Estrelas ICP-RIE system using positive photoresist SPR-955 as a mask material. Our findings demonstrate significant influences on the sidewall angle, etch rate, and trench shape due to these parameter modifications. Varying the table temperature between -80°C and -120°C under a constant process pressure of 10 mTorr changes the etch rate from 3 to 4 μm/min, while sidewall angle changes by ~2°, from positive ( 90° relative to the Si surface) tapering. Altering the O2 flow rate with constant SF6 flow results in a notable 10° shift in sidewall tapering. Furthermore, SPR-955 photoresist masks provide selectivity of 46:1 with respect to Si and facilitates the fabrication of MEMS devices with precise dimension control ranging from 1 to 100 μm for etching depths up to 42 μm using Cryo DRIE. Understanding the influence of each parameter is crucial for optimizing MEMS device fabrication.

Optimization of reactive-ion etching (RIE) parameters for fabrication of tantalum pentoxide (Ta2O5) waveguide using Taguchi method

Reactive ion beam etching for diffractive optical elements

Isotropic Etch for SiO2 Microcantilever Release with ICP System

Microstructure Optimization and Optical and Interfacial Properties Modulation of Sputtering-Derived Hfo2 Thin Films by Tio2 Incorporation

Optimization of an electron cyclotron resonance etch process using full wafer charge coupled device interferometry

Optimization of Wafer-level TTV Using RIE Applied for the Extreme Wafer Thinning

Improvement of ICP etching process for reducing the surface roughness of SiO2 optical waveguides

Optimized Inductively Coupled Plasma Etching for Poly(Methyl-Methacrylate-Glycidly-Methacrylate) Optical Waveguide

Reactive ion Etching of SiO2 and Mo Sidewall Profile Process

Achieving equivalent removal of Ta and Ru via controlling oxidation for chemical mechanical polishing of advanced barrier layer

A Parametric Study of ICP-RIE Etching on a Lithium Niobate Substrate

Wafer level bulk titanium ICP etching using SU8 as an etching mask

Highly Selective Etch of Silicon Dioxide with Tungsten Hard Mask Deposited by PVD Process

Development of Reactive-Ion Etching for ZnO-Based Nanodevices

Molybdenum etching using an SF6, BCl3 and Ar based recipe for high aspect ratio MEMS device fabrication

Fabrication of Slanted Grating Utilizing Reaction Ion Beam Etching: The Role of CHF<inf>3</inf> and O<inf>2</inf> Etching Atmosphere

Reactive ion etching of RuO2 thin films using the gas mixture O2/CF3CFH2

Dry Etching of TaN/HfO2 Gate Stack Structure by Cl2/SF6/Ar Inductively Coupled Plasma

High-Extraction-Rate Ta2O5-Core/SiO2-Clad Photonic Waveguides on Silicon Fabricated by Photolithography-Assisted Chemo-Mechanical Etching (PLACE)

Cryogenic DRIE Processes for High-Precision Silicon Etching in MEMS Applications

Nonlinear and low-loss tantalum pentoxide based micro-ring resonator by ion-assisted electron-beam deposition