Abstract:Lithium metal rechargeable batteries (LMBs) degrade rapidly due to morphological instabilities as well as electrolyte consumption. As an alternative to LiBCC metal foil, in this study, a self-supporting Li–Sb–Sn foil prepared by metallurgically alloying 5 wt%Sb-95 wt%Sn with LiBCC is used as the anode in full-cell configurations. The electrochemical performance is highly competitive against equal-thickness pure LiBCC foil, exhibiting much slower electrolyte degradation and less volume expansion: at the same amount of industrial-level electrolyte usage, LiFePO4/Li–Sn–Sb(50 μm) full cells can sustain twice longer cycle life than LiFePO4/LiBCC(50 μm) cells. When pairing Li–Sn–Sb anode against high-areal-capacity LiNi0.5Co0.2Mn0.3O2(NCM523), LiNi0.8Co0.1Mn0.1O2(NCM811) and LiCoO2(LCO) cathodes, the cell life is significantly improved compared to lithium metal batteries. In particular, ∼6 mAh cm−2 LCO/Li–Sb–Sn pouch cell delivers an initial energy density of 1073 Wh L−1. Coulombic inefficiency analysis combined with morphological observations reveals that the excellent full-cell performance of Li–Sn–Sb is correlated with the smaller apparent volume expansion (thickening) and superior mesoscale features. Theoretical calculations and experimental measurements affirm doping 5 wt% Sb significantly suppresses porosity and long crack damage, evidenced by the smaller porosity: 11% of Li–Sn–Sb versus 23% of Li–Sn, right after mechanical prelithiation, due to facile stress relief through the sliding grain boundaries (GBs), nano SnSb phase boundaries (PBs) and the soft buffering of residual Sn. The reaction kinetics and lithiation products of Sn electrode also change after doping Sb, breaking down a huge chemomechanical shock (Sn→Li22Sn5) into several milder ones (Sn→Li2Sn5→LiSn→Li22Sn5). While the Li-carrying ability of Li22Sn5 is similar to that of LiBCC, the low volume expansion, cycling stability and higher safety of prelithiated Li–Sn–Sb foil means it comprehensively surpasses LiBCC metal foil anode.

A room temperature alloying strategy to enable commercial metal foil for efficient Li/Na storage and deposition

Superior Stable and Long Life Sodium Metal Anodes Achieved by Atomic Layer Deposition.

Enhanced processability and electrochemical cyclability of metallic sodium at elevated temperature using sodium alloy composite

An autotransferable alloy overlayer toward stable sodium metal anodes

Laminated Tin–Aluminum Anodes to Build Practical Aqueous Aluminum Batteries

Optimizing Na plating/stripping by a liquid sodiophilic Ga-Sn-In alloy towards dendrite-poor sodium metal anodes

Hierarchical Li electrochemistry using alloy-type anode for high-energy-density Li metal batteries

Alloying-triggered heterogeneous nucleation for the flexible sodium metallic batteries

Stable sodium metal anode enabled by interfacial room‐temperature liquid metal engineering for high‐performance sodium–sulfur batteries with carbonate‐based electrolyte

Excellent sodium metal deposition enabled by three-dimensional porous structures with natrophilic Ni-Sn alloy

An In-Situ Alloyed Ni-Fe Co-reaction Electrode for High-Stability and High-Rate Na-metal Halide Batteries

Circumventing chemo-mechanical failure of Sn foil battery anode by grain refinement and elaborate porosity design

Li–Zn Overlayer to Facilitate Uniform Lithium Deposition for Lithium Metal Batteries

In Situ Forming Na─Sn Alloy/Na2S Interface Layer for Ultrastable Solid State Sodium Batteries

Artificial Aluminum-tin Alloy Layer on Aluminum Metal Anodes for Ultra-stable Rechargeable Aluminum-ion Batteries

Realizing Ultrathin LiSn Alloy Anode by Tuning the Wettability of Molten Li for High-Energy-Density Batteries

Stamping Flexible Li Alloy Anodes

Single-material Aluminum Foil As Anodes Enabling High-Performance Lithium-Ion Batteries: the Roles of Prelithiation and Working Mechanism

Multifunctional High‐Entropy Alloy Nanolayer Toward Long‐Life Anode‐Free Sodium Metal Battery

Development of low-carbon energy storage material: Electrochemical behavior and discharge properties of iron-bearing Al–Li-based alloys as Al–air battery anodes

Surpassing lithium metal rechargeable batteries with self-supporting Li–Sn–Sb foil anode