Abstract:The emerging market for consumer electronics and electric vehicles has stimulated intensive research on lithium metal batteries (LMBs) with high energy densities and large cycle lifetimes. A metallic Li anode has a high theoretical specific capacity of 3860 mAh.g(-1) and lowest redox potential of -3.04 V (vs. the standard hydrogen electrode) and is generally considered an ideal electrode for next-generation high-energy-density LMBs. However, their deployment in practical batteries is severely hindered by the formation of unsafe dendrites and fast capacity decay due to the uncontrollable formation of fragile solid electrolyte interfaces (SEls). Herein, we describe the stable cycling of carbon paper (Cp)-supported Li-Sn alloy anodes in carbonate electrolytes modified with 1 mol.L-1 bis(2,2,2-trifluorotoluene) carbonate (DTFEC). The molten Li-Sn alloy with 8% (mass fraction) Sn was synthesized through thermal treatment at 400 degrees C in an atmosphere of Ar. The Li-Sn-alloy-coated carbon paper (SnLi/Cp) was obtained after the molten alloy was conformally loaded onto the surface of a carbon paper under the action of capillarity. The as-synthesized interconnected SnLi/Cp composite was characterized by X-ray diffraction, energy-dispersive spectrometry, and scanning electron microscopy. The porous SnLi/Cp composite consisted of only Li and Sn5Li22 phases supported by the mechanically strong carbon paper with a good conductivity; no impurity was observed in the XRD results. The synergy of the DTFEC additive and alloying with Sn provided composite anodes with significantly improved rate capability and remarkable stability owing to the formation of a dense fluorinated SEI layer with high mechanical strength and ion penetration. Moreover, with the porous SnLi alloy covered by a fluorinated protection layer, lithium avoids the intrinsic issues of uncontrollable volume expansion and dendrite growth, which restrict the practical application of Li metal, exhibiting a stabilized over-potential of only 90 mV after 100 cycles at 8 mA.cm(-2). Notably, stable cycling with a 12 mu L lean electrolyte was also observed at 5 mA.cm(-2). Overall, the prototype full cell assembled with the SnLi/Cp anode and NMC811 cathode exhibited a high Coulombic efficiency (98.1%) and remarkable cycling stability for 300 cycles at 1C (1.5 mA.cm(-2)). The rate capability was evaluated at various rates of 0.5C to 5C. Compared to pure Li, the SnLi/Cp anode in the full cell exhibited a higher capacity, particularly at a high rate (similar to 126 mAh.g(-1 )at 5C). Our approach provides integrated Li metal electrodes with effectively improved cycle stabilities and is very attractive for practical high-energy-density lithium batteries.

Circumventing chemo-mechanical failure of Sn foil battery anode by grain refinement and elaborate porosity design

Enhanced lithium storage performance in three-dimensional porous SnO 2 -Fe 2 O 3 composite anode films

Surpassing lithium metal rechargeable batteries with self-supporting Li–Sn–Sb foil anode

Stress‐Regulation Design of Lithium Alloy Electrode toward Stable Battery Cycling

Steady cycling of lithium metal anode enabled by alloying Sn-modified carbon nanofibers

Sn‐Alloy Foil Electrode with Mechanical Prelithiation: Full‐Cell Performance Up to 200 Cycles

Tin-based Anode Materials with Well-Designed Architectures for Next-Generation Lithium-Ion Batteries

Synthesis of SnO2versus Sn Crystals Within N-doped Porous Carbon Nanofibers Via Electrospinning Towards High-Performance Lithium Ion Batteries

A nanoscale interlayer void design enabling high-performance SnO2-carbon anodes

Improvement In Performance Of Three-Dimensional Snli/Carbon Paper Anode In Lean Electrolyte With In Situ Fluorinated Protection Layer

Three-dimensional porous bowl-shaped carbon cages interspersed with carbon coated Ni–Sn alloy nanoparticles as anode materials for high-performance lithium-ion batteries

Locally regulating Li+ distribution on an electrode surface with Li-Sn alloying nanoparticles for stable lithium metal anodes

Li-Sn Alloyed Layer Containing Artificial SEI on Li-Metal Anode for Superior Lithium Metal Batteries: Development and Understanding of Anode/Electrolyte Interfacial Phenomena

Oxides Overlayer Confined Ni3Sn2 Alloy Enable Enhanced Lithium Storage Performance

In Situ‐Constructed Multifunctional Composite Anode with Ultralong‐Life Toward Advanced Lithium‐Metal Batteries

Novel Three Dimensional Hierarchical Porous Sn-Ni Alloys As Anode for Lithium Ion Batteries with Long Cycle Life by Pulse Electrodeposition

Electrochemical Performance of Three-Dimensional Porous Sn/Cu3Sn/CuO/SnO Composite As Anode Material for Lithium-Ion Batteries

Delicately Designed Sn-based Electrode Material Via Spray Pyrolysis for High Performance Lithium-Ion Battery

Facile One-Step Preparation of 3D Nanoporous Cu/Cu<sub>6</sub>Sn<sub>5</sub> Microparticles as Anode Material for Lithium-Ion Batteries with Superior Lithium Storage Properties

Anti-pulverization Intermetallic Fe–Sn Anchored on N-doped Carbon Anode Boosted Superior Power and Stable Lithium Storage

Synergistic Lithium Storage in Silica–Tin Composites Enables a Cycle-Stable and High-Capacity Anode for Lithium-Ion Batteries