Abstract:Journal of Circuits, Systems and Computers, Ahead of Print. The fabrication complexity and cost associated with nanoscale devices are major concerns. Therefore, to address these challenges, we have introduced a mole fraction-based approach for the sensitivity analysis of a dual material control gate cavity on a source electrically doped polarity-controlled tunnel field effect transistor (DMCG-CS-ED-PC-TFET)-based biosensor for label-free detection of biomolecule species. For this purpose, a polarity bias (electrically doped) of PG-[math][math]V and PG-[math][math]V is applied for the formation of n+ drain and p+ source regions, respectively, over the thin silicon body. The proposed device structure overcomes the random dopant fluctuation issues, thereby avoiding thermal budget and fabrication complexity as compared to the conventional TFET. Moreover, the nanogap cavity is created by etching the appropriate portion at the source side oxide layer. Furthermore, we have applied a dual metal work function (M1 and M2) at the gate electrode along with hetero material [math] at the source side region to improve the sensitivity of the device by varying the mole fraction value (X). The performance of the proposed device has been evaluated in terms of variations in carrier concentration profile, electric field variation, energy band diagram, transfer ([math]) characteristics and the sensitivity in terms of drain current (I[math]), ON-state current (I[math]) and switching ratio (I[math]/I[math]). Furthermore, the sensitivity of the proposed device biosensor has been investigated by considering nanocavity dimensions, practical challenges such as various fill factors, and various step profiles generated from steric hindrance. For this purpose, different neutral biomolecules such as Biotin ([math]), APTES ([math]), Keratin ([math]), Ferrocytochrome C ([math]) and Gelatin ([math]) have been considered in the etched nanocavity region. Additionally, charged biomolecules with positive (negative) charge densities at the oxide semiconductor interface below the nanocavity region have been incorporated to assess the performance of the proposed device using the Silvaco ATLAS device simulator. In this analysis, the proposed biosensor achieves a drain current sensitivity of [math] for neutral biomolecules ([math]), [math] for [math] = [math] cm[math] with [math] and [math] for [math] = [math] cm[math] and [math]. Finally, the performance of the proposed biosensor, DMCG-CS-ED-PC-TFET, exhibits higher sensitivity compared to various existing TFET-based biosensors. Hence, the proposed biosensor exhibits the potential candidate for the development of future sensing bio-equipment.

Performance analysis of ScAlN/GaN High Electron Mobility Transistor (HEMT) for biosensing application

AlGaN/GaN Heterostructures for Non-Invasive Cell Electrophysiological Measurements.

High-K dielectric-modulated dual-cavity MOSHEMT with III–V nitride GaN/AlGaN semiconductors: application as biosensor

The study of N-polar GaN/InAlN MOS-HEMT and T-gate HEMT biosensors

Review of the AlGaN/GaN High-Electron-Mobility Transistor-Based Biosensors: Structure, Mechanisms, and Applications

Enhancement of Sensing Performance of GaN-based MOS-HEMT Biosensors by Graded AlGaN Barrier

Biomolecule identification using superlattice AlGaN/GaN high-K MOSHEMT: a cutting-edge biosensing technique

A Theoretical Approach to Study the Frequency Dependent Dielectric behavior of Breast Cancer Cells using AlN buffer-based AlGaN/GaN HEMT

AlGaN/GaN Open-Gate High Electron Mobility Transistors for Glucose Detection

Design and Fabrication of High Sensitivity AlGaN/GaN HEMT Biosensors

Sensitivity analysis of bi-metal stacked-gate-oxide hetero-juncture tunnel fet with Si0.6Ge0.4 source biosensor considering non-ideal factors

Research on biomolecule-gate AlGaN/GaN high-electron-mobility transistor biosensors

Aluminum gallium nitride (GaN)/GaN high electron mobility transistor-based sensors for glucose detection in exhaled breath condensate

AlGaN/AlN/GaN MOS-HEMTs with Biomolecule Cavity: A Promising Approach for SARS-CoV-2 Biosensors

Mole Fraction-Based Approach for Sensitivity Analysis of Dual Material Control Gate Polarity Controlled Tunnel Field Effect Transistor for Applications in Biomedical Engineering

Development of a physics-based 2DEG analytical and simulation model of AlGaN/GaN HEMT biosensor for biomolecule detection—an algorithmic approach

Highly Sensitive Extended Gate-Algan/gan High Electron Mobility Transistor for Bioassay Applications

The Sensing Mechanism of InAlN/GaN HEMT

Design and sensitivity estimation of linear graded work function gate electrode hetero junction vertical TFET biosensor

Development of AlGaN/GaN MOSHEMT biosensors: State-of-the-art review and future directions

Study of Mechanism and Testing Method for Ph Sensing Using Open-Gate AlGaN/GaN High Electron Mobility Transistors