Abstract:High temperature passivating contacts for c-Si based solar cells are intensively studied because of their potential in boosting solar cell efficiency while being compatible with industrial processes at high temperatures. In this work, the hydrogenation mechanism of fired passivating contacts (FPC) based on c-Si/SiOx/nc-SiCx(p) stacks was investigated. More specifically, the correlation between passivation and local re-distribution of hydrogen resulting from the application of different types of interfacial oxides (SiOx) and post-hydrogenation processes was analyzed. To do so, the applied processing sequence was interrupted at different stages in order to characterize the samples. To assess the hydrogen content, deuterium was introduced (alongside/instead of hydrogen) and secondary ion mass spectroscopy (SIMS) was used for depth profiling. Combining these results with lifetime measurements, the key role played by hydrogen in the passivation of defects at the c-Si/SiOx interface is discussed. The SIMS profiles show that hydrogen almost completely effuses out of the SiCx(p) during firing, but can be re-introduced by hydrogenation via forming gas anneal (FGA) or by release from a hydrogen containing layer such as SiNx:H. A pile-up of H at the c-Si/SiOx interface was observed and identified as a key element in the FPC's passivation mechanism. Moreover, the samples hydrogenated with SiNx:H exhibited higher H content compared to those treated by FGA, resulting in higher iVOC values. Further investigations revealed that the doping of the SiCx layer does not affect the amount of interfacial defects passivated by the hydrogenation process presented in this work. Eventually, an effect of the oxide's nature on passivation quality is evidenced. iVOC values of up to 706 mV and 720 mV were reached with FPC test structures using chemical and UV-O3 tunneling oxides, respectively, and up to 739 mV using a reference passivation sample featuring a ~25 nm thick thermal oxide.

Optimum Hydrogen Injection in Phosphorus-Doped Polysilicon Passivating Contacts

Firing stability of phosphorus-doped polysilicon passivating contacts: Factors affecting the degradation behavior

Analysis of hydrogen distribution and migration in fired passivating contacts (FPC)

A Study of Optimization of Hydrogen Plasma Treatment on Poly-Si

Phosphorus-doped polycrystalline silicon passivating contacts via spin-on doping

On the passivation mechanism of poly-silicon and thin silicon oxide on crystal silicon wafers

Polysilicon Passivating Contacts for Silicon Solar Cells: Interface Passivation and Carrier Transport Mechanism

The Mechanism of Hydrogen Plasma Passivation for Poly-Crystalline Silicon Thin Film

Long-term stability study of the passivation quality of polysilicon-based passivation layers for silicon solar cells

Passivation Improvement of Poly-SiO<i><sub>x</sub></i> Based TOPCon Contacts by Thermal Annealing in a Water Vapor Atmosphere: Mechanism Exploration and Application Research

Influence of PECVD Deposition Power and Pressure on Phosphorus-Doped Polysilicon Passivating Contacts

Bulk Defects and Hydrogenation Kinetics in Crystalline Silicon Solar Cells With Fired Passivating Contacts

A Study of the Post-hydrogenation Passivation Mechanism of Crystallized Poly-Si Films

Phosphorus deactivation mechanisms by hydrogenation in the n+ emitter region and its effect on defects passivation in n+pp+ poly-silicon solar cells

The mechanism of hydrogen plasma passivation for poly-Si thin film

Enhancement of Electrical Properties of Nanostructured Polysilicon Layers Through Hydrogen Passivation

Passivation Roles Of Hydrogen Plasma Radicals On Crystallized Poly-Si

Hydrogen concentration profiles in as‐deposited and annealed phosphorus‐doped silicon dioxide films

Passivation Improvement of Poly‐SiOx Based TOPCon Contacts by Thermal Annealing in a Water Vapor Atmosphere: Mechanism Exploration and Application Research

Hydrogen Passivation for the Performance Enhancement of Poly-Si Crystallized by Double-Frequency YAG Laser