Oxide-nitride nanolayer stacks for enhanced passivation of p-type surfaces in silicon solar cells
Xinya Niu,Anastasia Soeriyadi,Guanze He,Shona McNab,Sergio Lozano-Perez,Ruy S. Bonilla
DOI: https://doi.org/10.1016/j.solmat.2024.113231
IF: 6.9
2024-11-26
Solar Energy Materials and Solar Cells
Abstract:In the quest for ultra-high-efficiency silicon solar cells, optimising surface passivation has emerged as a critical pathway to minimise losses and enhance device performance. Recent breakthroughs in aluminium oxide (AlO x ) passivation show an interface to Si with low interface defect density and high negative charge density after activation annealing at 400–450 °C, enabling low surface recombination velocities. The formation of an interfacial SiO x layer has been recognised as a key factor. In this study, we present an in-depth investigation of a SiO x /AlO x /SiN x nanolayer stack interface with Si, where the SiO x is wet chemically grown. By varying the AlO x deposition from 5 to 40 ALD cycles, we observed a reduction in interface defect density, indicating the presence of negatively charged hydrogen in the AlO x layer. We reveal a distinctly different interface between Si and nanolayer stacks with or without AlO x . Activation annealing significantly reduced recombination losses for stacks with AlO x , attributed to increased charge density and decreased carrier capture velocity at the valence band-tail. We find lower electron capture rates in nanolayer stacks containing AlO x , suggesting effective passivation of donor states by negatively charged hydrogen. Additionally, the formation of new acceptor states was detected by an increase in hole capture velocity at the interface after annealing. Electron energy loss spectroscopy (EELS) identified an Al:SiO x N y layer of ∼2.5 nm thick with excess oxygen content and a mixture of tetrahedral and octahedral coordinated Al, likely contributing to the formation of acceptor defects and suggest an intrinsic link between the chemical and field-effect passivation.
materials science, multidisciplinary,physics, applied,energy & fuels