Abstract:Overcoming the inherent strength-ductility trade-off remains a significant challenge in metallic materials. Most of the high-strength Mg-alloys having uniform ultrafine/fine-grained structure with a strong texture exhibit poor ductility at room temperature. Here, we prepared a novel multiscale hetero-structure in Mg-9Al-1Zn (AZ91) alloy, with a simultaneous high ultimate tensile strength and uniform ductility, i.e. ~400 MPa and ~14.5%, which is not accessible to previously reported uniform-grained Mg-alloys. Especially, the present multiscale hetero-structured AZ91 alloy is several times more ductile along with much enhanced toughness compared to its uniform-grained counterparts having comparable tensile strength. The multiscale microstructural heterogeneities, consisting of bimodal-structured (coarse grain ~10-100 μm and fine grain ≤10 μm) center-region and fine-grained surface-layer, were imparted by a new rolling process that combines advantages of both accumulative rolling bonding (ARB) and hard plate rolling (HPR). Using quasi-in-situ electron backscattered diffraction (EBSD) characterizations and slip trace analysis, the superior strength-ductility synergy was discussed in terms of the substantial activation of multiple strain accommodation mechanisms. Due to the high mechanical incompatibility of the multiscale hetero-structure, the hard-to-activate non-basal slips have occurred frequently in fine grains of both center-region and surface-layer. Moreover, the basal-oriented coarse grain in the bimodal-structured center-region plays a prominent role in the dislocation slip behavior of its neighboring fine grains, as reflected by a unique encircled slip trace distribution in them. Our findings reveal that multiscale hetero-structure enables the concurrent activation of various plastic deformation mechanisms. Thereby, the multiscale hetero-structure imparts a pronounced hetero-deformation induced hardening, contributing to enhanced strain-hardening ability, gaining an improved strength-ductility synergy. Our work could shed some light on designing and preparing strong and ductile metallic materials, by tailoring multiscale microstructural heterogeneity using a simple rolling technique.

Development of low-alloyed Mg–Zn–Ca–Sn–Mn alloy with high strength-ductility synergy by sub-rapid solidification and hot rolling

A high-performance Mg-Al-Sn-Zn-Bi alloy fabricated by combining sub-rapid solidification and hot rolling

Spheroiding and Refining of Coarse CaMgSn Phase in Mg–Al–Sn–Ca Alloys for Simultaneously Improved Strength and Ductility Via Sub-Rapid Solidification and Controlled Rolling

High strength-ductility synergy and low anisotropy of Mg-4.5Al-2.6Zn-0.3Mn alloy sheet achieved by annealing after rolling

Developing High-Strength and Ductile Mg-Gd-Y-Zn-Zr Alloy Sheet Via Bimodal Grain Structure Coupling with Heterogeneously-Distributed Precipitates

Development of Mg–6Al–4Sn–1Zn Alloy Sheets with Ultra-High Strength by Combining Extrusion and High-Speed Rolling

Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy

A Novel Mg-5Al-2Zn-2Sn Alloy with High Strength-Ductility Synergy Fabricated Via Simple Hot Rolling and Annealing Treatment

Developing Novel Multiscale Hetero-Structure in Mg-Alloy for High Strength-Ductility Synergy by Short-Routed Rolling

Balancing the Strength and Ductility of Mg-6Zn-0.2Ca Alloy Via Sub-Rapid Solidification Combined with Hard-Plate Rolling

Design of Multicomponent Mg–Al–Zn–Sn–Bi Alloys with Refined Microstructure and Enhanced Tensile Properties

Designing a low-alloyed Mg–Al–Sn–Ca alloy with high strength and extraordinary formability by regulating fine grains and unique texture

Novel Mg–Al–Sn–Zn–Y Alloys with Enhanced Strength−Ductility Combination Prepared by Hard‐Plate Rolling

Microstructure and Mechanical Property of High Strength Mg–Sn–Zn–Al Alloys

Designing a New Mg-Zn-Ca-Y Wrought Alloy with High Strength and Ductility Synergy

Dramatic Improvement of Formability in Mg-3Al-1Sn-0.5Ca-0.1Sm Alloy Via Mn Microalloying Combined with High Temperature Rolling

Enhancing Mechanical Properties of Rolled Mg-Al-Ca-Mn Alloy Sheet by Zn Addition

Mechanistic Study of Mg-Mn-Al Extrusion Alloy with Superior Ductility and High Strength

Solute Segregation Assisted Superplasticity in a Low-Alloyed Mg–Zn–Ca–Sn–Mn Alloy

Excellent Strength-Ductility Synergy Properties of Mg-Sn-Zn-Zr Alloy Mediated by a Novel Differential Thermal ECAP (DT-ECAP)

Effect of Ca addition on microstructure and mechanical properties of Mg–3.8Al–1.1Sn alloys