Abstract:Most of the high-strength Mg alloys exhibit poor ductility at room temperature. Architecturing appropriate heterostructure in metallic materials gives rise to the breakthrough of the inherent strength-ductility trade-off dilemma. Here, we prepared a novel multiscale hetero-structure in Mg-9Al-1 Zn (AZ91) alloy, consisting of bimodal-structured center-region and fine-grained surface-layer, providing high strength and high ductility, i.e. yield strength of ∼303 MPa, tensile strength of ∼400 MPa, and elongation of ∼14.5 %. The multiscale microstructural heterogeneities were induced via a simple rolling process that combines the advantages of both accumulative rolling bonding (ARB) and hard plate rolling (HPR). By utilizing quasi-in-situ electron backscattered diffraction (EBSD)-digital image correlation (DIC) characterizations combined with the determination of dislocation/disclination distributions, it has been found that diversified strain accommodation mechanisms are stimulated by the strain incompatibilities near hetero-interfaces in the multiscale hetero-structure. In particular, non-basal slips have been activated largely in both the bimodal-structured center-region and fine-grained surface-layer. Moreover, a unique slip trace distribution has been observed in the fine grains adjacent to the basal-oriented coarse grain. Such a strain accommodation can better coordinate local strain incompatibility among the hetero-interface. The uniaxial loading–unloading–reloading tensile loop tests demonstrate that the multiscale heterogeneities impart a pronounced hetero-deformation induced hardening during tensile deformation. Multiple deformation modes, including the non-Schmid and non-basal slips, have been activated substantially in the multiscale hetero-structured Mg alloy, effectively relaxing local stress concentration and achieving stable plastic flow at a high-stress state, which is beneficial to improving strain-hardening ability and strength-ductility synergy. Our work could shed light on designing and processing strong and ductile Mg alloys, by tailoring proper microstructural heterogeneity to activate cooperated accommodating deformation modes.

Toward strength-ductility synergy in Al–Mg alloys: augmenting solute Mg concentration and strain-hardening ability via melt spinning and hot extrusion

Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy

Tailoring the heterophase interfacial structures to improve both strength and ductility of Al-Li alloys by fine tuning major solute Mg

Achieving ultrahigh strength in binary Al-10Mg alloy through heavy cryogenic rolling

Enhanced strength-ductility synergy and activation of non-basal slip in as-extruded Mg–Zn–Ca alloy via heterostructure

Achieving excellent strength-ductility in Al–Si–Cu–Mg cast alloy via effective work hardening

Effect of Ca addition on microstructure and mechanical properties of Mg–3.8Al–1.1Sn alloys

Towards extraordinary strength-ductility synergy in pure Mg via dislocation transmutation

Achieving high strength via solutes co-clustering and solvents redistribution in an ultralightweight BCC magnesium alloy

Exploiting an as-extruded fine-grained Mg-Bi-Mn alloy with strength-ductility synergy via dilute Zn addition

High strength and high ductility achieved in a heterogeneous lamella-structured magnesium alloy

Microstructure evolution, mechanical property response and strengthening mechanism induced by compositional effects in Al–6 Mg alloys

Achieving High Strength-Ductility Synergy in Low-Alloyed Mg-Li-Er Extrusion Alloys via Tailoring Bimodal-Grained Structure

Fabrication of high strength-ductility Mg-3.8Al-1.1Sn-0.4Ca alloy via differential-thermal asymmetric extrusion

Alloying design and microstructural control strategies towards developing Mg alloys with enhanced ductility

Simultaneous enhancement of strength and ductility by combining heterogeneous microstructure and nanoprecipitates

Strength-ductility synergy via cryogenic severe plastic deformation in an Al–Mg alloy achieved by clustering-induced strengthening

Development of low-alloyed Mg–Zn–Ca–Sn–Mn alloy with high strength-ductility synergy by sub-rapid solidification and hot rolling

Unveiling the microstructure evolution and deformation mechanisms of micro-alloying Mg-1.5Zn-0.5Zr-0.5Sr alloy via extrusion-shearing

Deformation mechanisms in a novel multiscale hetero-structured Mg alloy with high strength-ductility synergy

Acquiring Mg-Ag microalloying TiB 2 /Al-4.5Cu composite simultaneously with ultrahigh strength and ductility via optimized salt-metal reaction and multistage heat treatment