Abstract:For the past two decades piezo MEMS technology are emerging for its low power consumption of ultrasonic sensing and actuation devices for biomedical applications. Still researchers are facing challenges in miniaturization of piezo-MEMS devices. But up-to-date there is no reports on achieving better sensitivity and actuation strength properties in the same piezoelectric material. As piezoelectric materials are anisotropic in nature, for that it is essential to grow different textured PZT thin film on a single silicon substrate. In the present investigation we have demonstrated the simple method of growing different textured PZT thin film with same process condition without introducing any buffer layer on a platinised silicon wafer by wet chemical method. For this two types of modified bottom electrode Ti/Pt stacks have been proposed i.e., mono- and bilayer Pt on a same silicon substrate using lithography techniques. The texture of the PZT thin film grown on these Pt layers shows (111) and (100) preferred orientations. The XPS surface analysis was carried out on both Pt surfaces to investigate the anomalous behaviour of different textured PZT on different Pt layers. The measured ferroelectric and piezoelectric properties has shown low remanent polarization and high piezocoefficient values for (100) oriented film as reported. The (100) oriented film shows piezocoefficient (d33,f) value twice than that of (111) oriented PZT thin films on a single silicon substrate.

Patterning PZT Thin Films using Reactive Ion Beam Etching for PiezoMEMS, RF MEMS Resonator and Filter Applications

A Two-step Wet Etching Process of PZT Thin Film With Ultra-low Undercut for MEMS Applications

High Quality PZT Thick Films Using Silicon Mold Technique for MEMS Applications

Deep Plasma Etching of Piezoelectric PZT with SF6

Processing of PZT Microstructures

Fabrication of Patterned Polymer Resists for Ion Etching by Using Dewetting

Different textured PZT thin films grown on a single SiO2/Ti/Pt stack for piezo MEMS applications

Fabrication of (100) Orientated PZT Thin Films for MEMS Applications

Fabrication of PZT microdevices using a high-yield sol-gel process

Rf-Mems Baw Filter Using Surface Micromachining

Excellent Uniformity and Properties of Micro-Meter Thick Lead Zirconate Titanate Coatings with Rapid Thermal Annealing

Reactive Ion Etching of Piezoelectric Pb(ZrxTi1−x)O3 in a SF6 Plasma

Reactive Ion Etching of Sol-Gel derived PZT thin film and Pt/Ti bottom electrode for FRAM

Magnetically Enhanced Reactive Ion Etching of Lead Zirconate Titanate Thin Film by CHF3 Plasma

Reactive ion etching of piezoelectric Pb(Zr[sub x]Ti[sub 1−x])O[sub 3] in a SF[sub 6] plasma

Study of Polyimide As Sacrificial Layer with O-2 Plasma Releasing for Its Application in Mems Capacitive Fpa Fabrication

Synthesis, Microstructure and Properties of Magnetron Sputtered Lead Zirconate Titanate (PZT) Thin Film Coatings

PZT MEMS ACTUATOR WITH INTEGRATED BURIED PIEZORESISTORS FOR POSITION CONTROL

Deep Reactive Ion Etching of Z-Cut Alpha Quartz for MEMS Resonant Devices Fabrication

Advances in piezoelectric PZT-based RF MEMS components and systems

PZT Thin Films for RF Resonators and Filters