Abstract:Normally off AlGaN/GaN high electron mobility transistors with a p-type gate are promising for power switching applications, with advantages of low energy consumption and safe operation. In this work, p-NiO is employed as a gate stack, and the interfacial reconstruction and band structure modification at the p-NiO/AlGaN interface have been demonstrated to manipulate channel transport of AlGaN/GaN high electron mobility transistors by post-annealing. In addition to achieving a positive threshold voltage of 0.6 V and a large saturation output current of 520 mA/mm, we found that the gate leakage and On/Off drain current ratio can be improved significantly by more than 104 due to the p-NiO/AlGaN interfacial reconstruction. However, high annealing temperature also results in an increasing ON-resistance and a dramatically increased knee voltage (VK), which can be attributed to the formation of an ultra-thin γ-Al2O3 layer and the substitution of O on N site as a shallow donor at the p-NiO/AlGaN interface confirmed by experimental analyses. Theoretical calculations indicate that such interface reconstruction facilitates an additional potential well at the p-NiO/AlGaN interface to which electrons are spilled out from a two-dimensional electron gas channel under high forward gate voltage, resulting in the increased VK. Finally, an optimized annealing condition was confirmed that can eliminate this increased VK phenomenon and simultaneously remain these significantly improved device performances. These findings provide deep understanding of the performance manipulation of AlGaN high electron mobility transistors, which is very important for engineering the p-NiO/AlGaN interface toward high-performance and stable devices.

Integration of low-thermal-budget In2O3 NMOS inverter and GaN HEMT for power electronics

A 2–10 MHz GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping and Dual Level Shifters for Automotive Applications

Monolithic β-Ga2O3 NMOS IC based on heteroepitaxial E-mode MOSFETs

A Gallium Nitride Integrated Power Module with Ultra-low Parasitic Inductances and Thermal Resistance

A GaN HEMT Integrated Power Module with Silver Sintering Processes

Integration of Ferroelectrics with III-N Transistors for High Performance Millimeter-Wave Applications

Monolithic Integration of Gate Driver and Protection Modules with P-GaN Gate Power HEMTs

Monolithically Integrated Logic Circuits Based on P-Nio Gated E-mode GaN HEMTs

Ultra-Wide Bandgap Ga$_2$O$_3$-on-SiC MOSFETs

E/D-Mode GaN Inverter on a 150-mm Si Wafer Based on p-GaN Gate E-Mode HEMT Technology

Ultra-Wide Band Gap Ga2O3-on-SiC MOSFETs

High Temperature Characteristics of GaN-Based Inverter Integrated With Enhancement-Mode (E-Mode) MOSFET and Depletion-Mode (D-Mode) HEMT

NiO/AlGaN interface reconstruction and transport manipulation of p-NiO gated AlGaN/GaN HEMTs

AlN/beta-Ga2O3 based HEMT: a potential pathway to ultimate high power device

High- ${k}$ HfO 2 -Based AlGaN/GaN MIS-HEMTs with Y 2 O 3 Interfacial Layer for High Gate Controllability and Interface Quality

Monolithic Integration of GaN-Based Enhancement/Depletion-Mode MIS-HEMTs with AlN/SiN Bilayer Dielectric

Efficient III-Nitride MIS-HEMT devices with high-κ gate dielectric for high-power switching boost converter circuits

Charge trapping layer enabled high-performance E-mode GaN HEMTs and monolithic integration GaN inverters

Enhancement-Mode GaN P-Channel MOSFETs for Power Integration

Normally-off AlN/β-Ga2O3 Field-Effect Transistors Using Polarization-Induced Doping

Normally-Off p-GaN Gated AlGaN/GaN MIS-HEMTs with ALD-Grown Al2O3/AlN Composite Gate Insulator