Abstract:As electronics become lighter, shorter and more complex, the potential damage to integrated circuits (ICs) from electrostatic discharge (ESD) becomes more severe. In many applications, high voltages will result in high electric fields and high current densities in miniaturized components, which can lead to gate oxide breakdown of circuit components and thermal damage in ICs. Therefore, ESD protection circuits are added inside the electronic product in order to prevent the above damage, but the area of the protection cell should not be too large, otherwise a large proportion of the IC manufacturing cost is spent on the protection circuit. In this paper, we investigate how to improve the ESD protection of the designed high-voltage components through TSMC’s 0. 1S-micron BCD HV process. The sample structures of this work all use high-voltage N-channel laterally diffused MOSFETs (LDMOS), and the I/O protection components can be improved by this protection architecture. First, the ESD robustness of the device is enhanced by embedding a Schottky diode in the bulk end of the nLDMOS. The Schottky diode is parasitized horizontally at the body terminal. Since the parasitic Schottky diode is at the body electrode of the device, the parasitic BJT capability is enhanced, making it easier to trigger the conductivity of the device. Therefore, the new components $\mathrm{V}_{\mathrm{t}i}$ and $\mathrm{V}_{\mathrm{h}}$ values decrease (because the horizontal parasitic Schottky is reversed so the decreasing is obvious), so that the high-voltage ESD protection components have a better performance under ESD events, this design also makes the anti-ESD capacity $\mathrm{I}_{\mathrm{t}2}$ significantly increased. In the case of the body-end horizontal (reversed) embedded Schottky element, the largest $\mathrm{I}_{\mathrm{t}2}$ is found on the $\mathrm{R}\mathrm{e}\mathrm{f}_{-}8\mathrm{S}_{-}\mathrm{B}_{-}8$ device, whose $\mathrm{I}_{\mathrm{t}2}$ improvement rises up to 4. 529A, an significant increase of 244.41% was achieved as compared with the reference sample.

N-Buffer Design for Silicon-Based Power Diode Targeting High Dynamic Robustness and High Operating Temperature Over 448 K

Pulsed Corona Generation Using a High-Power Semiconductor Diode Switch

Optimisation of Local Lifetime Control in High Power Diode

Mos Controlled Diodes - A New Power Diode

Design and Optimization of Planar Mesa Termination for Diamond Schottky Barrier Diodes

P-i-N Diode Chip Temperature Extraction Method by Investigation into Maximum Recovery Current Rate Di/dt

Commercialization of Highly Rugged 4H-Sic 3300 V Schottky Diodes and Power MOSFETs

Research on Fast Recovery Diodes Typed ZK1105/4500

Ga2O3/NiO junction barrier Schottky diodes with ultra-low barrier TiN contact

An Investigation of Body Diode Reliability in Commercial 1.2 kV SiC Power MOSFETs with Planar and Trench Structures

Design of SEE-Tolerant analog switch chip with a novel diode structure

Optimizing TCAD Model and Temperature-Dependent Analysis of Pt/AlN Schottky Barrier Diodes for High-Power and High-Temperature Applications

Single Pulse Avalanche Robustness and Analysis for 1200-V SiC Junction Barrier Schottky Diode

2Kv SiC Floating Island SBD with N+ Buffer

Methodology for Enhanced Surge Robustness of 1.2-kV SiC MOSFET Body Diode

1.2-kV Low-Barrier 4H-SiC JBS Diodes by Virtue of P-Implants Across Dead Field of Current Flow

1.2-Kv 4H-Sic Merged PiN Schottky Diode with Improved Surge Current Capability

Decoupled Plasma Nitridation (DPN) and Postnitridation Annealing (PNA) Treatment for Metal Boundary Effect Reduction

Enhanced ESD-Capability of High-Voltage 32 V N-Channel LDMOSs with the Body-Side Hetero-Junction Structure

Improving Surge Current Capability of SiC Merged PiN Schottky Diode by Adding Plasma Spreading Layers

A Low-Loss 1.2 kV SiC MOSFET with Improved UIS Performance