Abstract:A comparative study of surge current reliability of 1200 V/5 A 4H-SiC (silicon carbide) MPS (Merged PiN Schottky) diodes with different technologies is presented. The influences of device designs in terms of electrical and thermal aspects on the forward conduction performance and surge current capability were studied. Device forward characteristics were simulated and measured. Standard single-pulse surge current tests and thermal impedance measurements were carried to show their surge capability and thermal design differences. An advanced thermal RC (thermal resistance-capacitance) model, with the consideration of current distribution non-uniformity effects, is proposed to accurately calculate the device junction temperature during surge events. It was found that a thinner substrate and a hexagonal layout design are beneficial to the improvement of the bipolar conduction performance in high current mode, as well as the surge current capability. The thinner substrate design also has advantages on thermal aspects, as it presents the lowest thermal resistance. The calculated failure temperature during the surge tests is consistent with the aluminum melting phenomenon, which is regarded as the failure mechanism. It was demonstrated that, for a SiC MPS diode, higher bipolar conduction performance is conducive to restraining the joule heat, and a lower thermal resistance design is able to accelerate the heat dissipation and limit the junction temperature during surge events. In this way, the MPS diode using a thinner substrate and advanced layout design technology is able to achieve 60% higher surge current density capability compared to the other technologies.

Commercialization of Highly Rugged 4H-Sic 3300 V Schottky Diodes and Power MOSFETs

Reliability Analysis for Commercial SiC MOSFETs in Single Pulse and Repetitive Surge Current Test

Reliability Investigation on SiC Trench MOSFET under Repetitive Surge Current Stress of Body Diode

Dynamic Performance of 6.5kV/400A SiC MOSFET Module and its Gate Driver

High-Performance 700 V SiC MOSFETs for the Industrial Market

An Investigation of Body Diode Reliability in Commercial 1.2 kV SiC Power MOSFETs with Planar and Trench Structures

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

1700 V full-SiC half-bridge power module with low switching loss

Long-term reliability of a hard-switched boost power processing unit utilizing SiC power MOSFETs

3.3 Kv-Class 4H-Sic Epi-Refilled Super-Junction Diode with Repetitive Surge Current Robustness

High Temperature Performance of 6500V 4H-Sic MOSFET with Embedded Schottky Barrier Diode

Design and Fabrication of 1.2kv SBD Integrated 4hsic MOSFET for Reliable Reverse Conduction

Review and analysis of SiC MOSFETs’ ruggedness and reliability

A Comparative Study of Silicon Carbide Merged PiN Schottky Diodes with Electrical-Thermal Coupled Considerations

Single Pulse Avalanche Robustness and Analysis for 1200-V SiC Junction Barrier Schottky Diode

Recent advances in silicon carbide MOSFET power devices

3.3 kV 4H-SiC Trench Semi-Superjunction Schottky Diode With Improved ON-State Resistance

Evaluation of Long-Term Reliability and Overcurrent Capabilities of 15-kV SiC MOSFETs and 20-kV SiC IGBTs During Narrow Current Pulsed Conditions

A Comparative Study of SiC MOSFETs with and Without Integrated SBD

Experimental Investigation of the Single Pulse Surge Current Ruggedness of the Body Diode of SiC Power MOSFETs