Abstract:Rare-earth-doped SiAlON and Si3N4 materials from aluminosilicate starting materials have been reported to show superior photoluminescence (PL) properties. Three different starting materials, including pulverized coal furnace fly ash, diatomite and raw illite, were used for synthesis of nitride materials. The phase and morphology evolution of these products were carefully monitored at the low temperature range of 1350 °C to 1450 °C by X-ray diffraction (XRD), scanning electronic microscopy (SEM) and Fourier-transform infrared spectroscopy (FT-IR). The PL properties of Eu-doped nitride products were also comparatively characterized. The results show that the type of starting material affects the phase composition and the photoluminescence properties of products. The existence of aluminum and alkali metals could effectively promote nitridation reactions. Aluminum in the starting materials led to the formation of different aluminum-rich nitride phases. Thus, β-SiAlON could be achieved at a much lower temperature (1350 °C) using raw illite or fly ash containing the proper amount of aluminum. Additionally, excess aluminum led to the formation of corundum and 15R-SiAlON. The products from pulverized coal furnace fly ash had more prismatic particles, and the products from diatomite had more fibrous particles. With the progress of the nitridation process, the fibers were increased, becoming longer and straighter, and the prismatic particles were more obvious. The presence of aluminum in the starting materials led to a blue shift in the photoluminescence spectrum.

Rapid synthesis of AlON powders by nitriding combustion synthesis precursor

Preparation of transparent AlON from powders synthesized by novel CRN method

Transparent AlON ceramics by nitriding combustion synthesis precursors and pressureless sintering method

AlON transparent ceramics from powders synthesized by improved direct nitridation

Gas‐Phase and Solid‐State Simultaneous Mechanism for Two‐Step Carbothermal AlON Formation

Optical properties of powder and ceramics of aluminium oxynitride obtained by self-propagating high-temperature synthesis

Synthesis of AlN nanocrystalline powders

Controllable Synthesis of High-purity β-SiAlON Powder

Study on AlON phase evolution and densification behavior as a function of particle size and doping amount

Synthesis, microstructures and properties of γ-aluminum oxynitride

Synthesis of Aluminum Nitride Using Sodium Aluminate as Aluminum Source

Solid-state NMR and XRD study of α-SiAlON powders prepared by combustion synthesis

Fabrication of one-dimensional rod-like α-SiAlON powders in large scales by combustion synthesis

Phase transformation and growth of rod-like α-SiAlON particles during combustion synthesis

Oxidation behavior and mechanism of aluminum oxynitride (AlON) at elevated temperatures

Combustion synthesis of fine aluminum nitride powders under micropositive N 2 pressure with water additive

Combustion synthesis of alpha SiAlON powders with low oxygen contents by using fluorides as reactants

Mechanical-activation-assisted combustion synthesis of α-SiAlON in air

Synthesis of Ultrafine AlN Powders in an Al-OC-N System

Carbothermal Reduction Nitridation of Fly Ash, Diatomite and Raw Illite: Formation of Nitride Powders with Different Morphology and Photoluminescence Properties

Combustion Synthesis of α-SiAlON Powders with Low Oxygen Contents by Using Fluorides as Reactants