Abstract:This work focuses on continuously operated spray granulation processes in horizontal fluidized beds highlighting the influence of process conditions on the particle properties of the resulting product granules. The drying process has a decisive influence on the kinetics of the growth rate and thus also on the properties of the particles, such as the morphological structure, particle moisture content and porosity as well as density, compression strength and the wetting behavior. This influence has been considered in this study in more detail on the basis of the model material sodium benzoate. In order to compare the produced granules at different drying conditions and spray rates of the suspension an external product classification was used to achieve a certain product granule size. The obtained experimental results show a deep influence of the thermal conditions onto granule morphology and structural properties, which is in qualitative agreement with recent experimental observations (Rieck et al., 2015; Hoffmann et al., 2015a; Schmidt et al., 2017b). The overall trend of the results reveal smoother product granules with decreasing spray rates of the suspension and increasing drying temperatures. These smoother surface morphologies lead to a more homogeneous layering which has as a consequence that the internal particle porosity is decreasing while the solids density and the compression strength of the particles are increasing at the same time. In this study the purely qualitative classification of the surface texture from previous experimental studies was extended by the topographic analysis of the product granules, giving the possibility to quantify the morphological structure by means of roughness measurements. This makes the morphological design accessible as product property and permits the utilization of models that describe the morphology according to the process conditions.

Analysis of product properties in counter-current spray drying with two nozzles system

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

Measurement of Atomization Characteristics on Water Mist Fire Suppression Nozzle

Development of In-Line Measurement Techniques for Monitoring Powder Characteristics in a Multi-Stage Spray Drying Process

Influence of drying conditions on layer porosity in fluidized bed spray granulation

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process

Effects of different mesh nebulizer sources on the dispersion of powder formulations produced with a new small-particle spray dryer

Impact of the drying rate on product properties of spray dried emulsions to enable a targeted product design

Recent initiatives in effective modeling of spray drying

Product-Property Guided Scale-Up of a Fluidized Bed Spray Granulation Process Using the CFD-DEM Method

Effect of foam spray drying process parameters on powder morphology

Correlation and Regression Analysis of Spraying Process Quality Indicators

Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process

Experimental Investigation of Spray Drying Breakup Regimes of a PVP-VA 64 Solution Using High-Speed Imaging

Understanding the operating limitations of an internal-mixing Air-Core-Liquid-Ring (ACLR) nozzle for process intensification in spray drying

Study on the Atomization Characteristics of High-pressure Nozzle with an In-line Distributor

A new method for continuous measurement of residence time distribution in spray drying

Effect of the Addition of Diblock Copolymer Nanoparticles on the Evaporation Kinetics and Final Particle Morphology for Drying Aqueous Aerosol Droplets

Particle morphology and powder properties during spray drying of maltodextrin and whey protein mixtures

Spray drying and nano spray drying as manufacturing methods of drug-loaded polymeric particles

Three-Dimensional Spray-Drying Model Based on Comprehensive Formulation of Drying Kinetics