Abstract:Increasing working voltage is a promising way to increase the energy density of lithium-ion batteries. Cycling and rate performance deteriorated due to excessive electrolyte decomposition and uncontrolled formation of a cathode–electrolyte interface (CEI) layer at a high voltage. A new concept is proposed to construct a high-voltage-stable electrode–electrolyte interface. An elastomeric poly(dimethyl siloxane) (PDMS) binder is incorporated into the electrode to modify the LiNi0.5Co0.2Mn0.3O2 (NCM 523) particle surface via an in situ cross-linking reaction between hydroxy-terminated PDMS and methyl trimethoxy silane promoted by moisture at ambient conditions (MPDMS). Improved electrochemical performance is achieved with the MPDMS binder in terms of reversible capacity (201 vs 185 mAh·g–1 at 0.2C), capacity retention (80 vs 68%, after 300 cycles at 1C), and rate performance (55.6% increase at 5C), as demonstrated by the NCM 523||Li half-cell. The NCM 523||graphite full-cell also shows improved performance at 4.6 V (147 vs 128 mAh·g–1, 82 vs 76%, after 200 cycles at 1C). The mechanism studies indicate that MPDMS exerts multiple effects, including cathode surface passivation, solvation structure tuning, electrolyte uptake enhancement, and mechanical stress relief. This work provides an inspiring route to realize high-voltage application of lithium-ion battery technology.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c01245.Viscosity changes of NCM-PVDF and NCM-MPDMS/PVDF electrode slurries at different shear rates; cross-sectional SEM images of NCM-PVDF and NCM-MPDMS/PVDF electrode applied with ion polishing after 100 cycles; discharge specific capacity of the NCM-PVDF and NCM-MPDMS/PVDF electrodes at different voltages with different current densities; cycling and rate performance of the NCM-PVDF and NCM-MDMS/PVDF electrodes between 2.8 and 4.3 V; SEM images of NCM-PVDF and NCM-MPDMS/PVDF electrodes before cycling; cross-section SEM images of the NCM-PVDF and NCM-MPDMS/PVDF electrodes after 100 cycles via ion polishing treatment; TEM images of NCM 523 pristine particles, NCM-MPDMS/PVDF, and NCM-PVDF electrodes before cycling; EDS images of NCM-PVDF NCM-MPDMS/PVDF electrodes before and after 100 cycles; the electrochemical impedance (EIS) profiles of the cells measured at different cycles and canning voltammetry curves at different sweep rates between 2.8 and 4.6 V for NCM-PVDF and NCM-MPDMS/PVDF electrodes; C 1s spectrum of the NCM-PVDF and NCM-MPDMS/PVDF electrodes before and after 100 cycles; Ni 2p XPS spectra of the NCM-PVDF and NCM-MPDMS/PVDF electrodes after 100 cycles; active adsorption sites of lithium ions in PDMS, PVDF, EC, and DMC and their corresponding adsorption energies (PDF)This article has not yet been cited by other publications.

Surface modification enabling 4.7 V Nickel-rich layered cathode with superior long-term cyclability via novel functional polyimide binders

Novel polyimide binder for achieving high-rate capability and long-term cycling stability of LiNi0.8Co0.1Mn0.1O2 cathode via constructing polar and micro-branched crosslinking network structure

Novel polyimide binders integrated with soft and hard functional segments ensuring long-term high-voltage operating stability of high-energy NCM811 lithium-ion batteries up to 4.5 V

Surface Coating of NCM523 Cathode Electrodes by the Difunctional Block Copolymer/Lithium Salt Composites

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Polyvinylpyrrolidone-Induced Uniform Surface-Conductive Polymer Coating Endows Ni-Rich LiNi0.8Co0.1Mn0.1O2 with Enhanced Cyclability for Lithium-Ion Batteries.

One Stone for Multiple Birds: A Versatile Cross-Linked Poly(dimethyl siloxane) Binder Boosts Cycling Life and Rate Capability of an NCM 523 Cathode at 4.6 V

Carbonized Polymer Dots Enhancing Interface Stability of LiNi0.8Co0.1Mn0.1O2 Cathodes

Protective and ion conductive: High-Rate Ni-Rich cathode with enhanced cyclic stability via One-Step bifunctional dual-layer coating

Having Your Cake and Eating It Too: Electrode Processing Approach Improves Safety and Electrochemical Performance of Lithium-Ion Batteries

Polyimides: Stable Cathode Active Material Coatings at High Voltage

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Constructing fast-ion-diffusion cathode-electrolyte-interphase to improve LiNi0.8Co0.1Mn0.1O2 cathode cyclic stability with composite polymer conductors

Lithium-conductive LiNbO3 Coated High-Voltage LiNi0.5Co0.2Mn0.3O2 Cathode with Enhanced Rate and Cyclability

Dual-modified surface encapsulation strategy for elevating rate performance and cycling stability of Ni-rich NCM811 cathode

Polyimide Encapsulated Lithium-Rich Cathode Material for High Voltage Lithium-Ion Battery

Enhanced high-rate and cyclic performance of Co-free and Ni-rich LiNi0.95Mn0.05O2 cathodes by coating electronic/Li+ conductive PANI-PEG layer

Surface Modification Engineering Enabling 4.6 V Single‐Crystalline Ni‐Rich Cathode with Superior Long‐Term Cyclability

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Multifunctional Electrolyte Additive for High-Nickel LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes of Lithium-Metal Batteries

Striking a Balance: Exploring Optimal Functionalities and Composition of Highly Adhesive and Dispersing Binders for High‐Nickel Cathodes in Lithium‐Ion Batteries