Abstract:In this work, ultra‐thin electron‐ion dual conductor coating on the surface and Al gradient doping in the bulk phase of NCM523 is successfully achieved by ALD, which simultaneously enhances the conductivity and stability of NCM523 at high‐voltage. This modification has enabled NCM523 to achieve high‐capacity performance and long cycle life under ultra‐high current density (1900 mAh g−1, 10 C) at 4.6 V. Simultaneously achieving high‐energy‐density and high‐power‐density is a crucial yet challenging objective in the pursuit of commercialized power batteries. In this study, atomic layer deposition (ALD) is employed combined with a coordinated thermal treatment strategy to construct a densely packed, electron‐ion dual conductor (EIC) protective coating on the surface of commercial LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode material, further enhanced by gradient Al doping (Al@EIC‐NCM523). The ultra‐thin EIC effectively suppresses side reactions, thereby enhancing the stability of the cathode‐electrolyte interphase (CEI) at high‐voltages. The EIC's dual conduction capability provides a potent driving force for Li+ transport at the interface, promoting the formation of rapid ion deintercalation pathways within the Al@EIC‐NCM523 bulk phase. Moreover, the strategic gradient doping of Al serves to anchor the atomic spacing of Ni and O within the structure of Al@EIC‐NCM523, curbing irreversible phase transitions at high‐voltages and preserving the integrity of its layered structure. Remarkably, Al@EIC‐NCM523 displays an unprecedented rate capability (114.7 mAh g−1 at 20 C), and a sustained cycling performance (capacity retention of 74.72% after 800 cycles at 10 C) at 4.6 V. These findings demonstrate that the proposed EIC and doping strategy holds a significant promise for developing high‐energy‐density and high‐power‐density lithium‐ion batteries (LIBs).

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Mixed-conducting Interlayer Boosting the Electrochemical Performance of Ni-rich Layered Oxide Cathode Materials for Lithium Ion Batteries

Functional Passivation Interface of LiNi 0.8 Co 0.1 Mn 0.1 O 2 toward Superior Lithium Storage

An Effective Dual-Modification Strategy to Enhance the Performance of LiNi0.6Co0.2Mn0.2O2 Cathode for Li-ion Batteries

Stabilizing the Interphase in an Ultra-High-Nickel Cathode Enabling High-Performance Lithium-Ion Batteries

Both Interface and Bulk Stable LiNi 0.5 Mn 1.5 O 4 Cathodes for High-Energy Li-Ion Batteries

Dual Cationic Modified High Ni-Low Co Layered Oxide Cathode With A Heteroepitaxial Interface For High Energy-Density Lithium-Ion Batteries

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

Stabilizing reaction interface in Ni-rich layered oxides cathode for high-performance lithium-ion batteries at a high cutoff voltage

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Enhancing the High Voltage Interface Compatibility of LiNi0.5Co0.2Mn0.3O2 in the Succinonitrile-Based Electrolyte

Multifunctional Integration of Double-Shell Hybrid Nanostructure for Alleviating Surface Degradation of LiNi0.8Co0.1Mn0.1O2 Cathode for Advanced Lithium-Ion Batteries at High Cut-Off Voltage.

Regulation of Interface Ion Transport by Electron Ionic Conductor Construction toward High‐Voltage and High‐Rate LiNi0.5Co0.2Mn0.3O2 Cathodes in Lithium Ion Battery

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

Al- and Nb-Comodified Ni-Rich NCM Cathode for High-Performance Lithium-Ion Batteries

Multifunctional Integration of Double-Shell Hybrid Nanostructure for Alleviating Surface Degradation of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> Cathode for Advanced Lithium-Ion Batteries at High Cutoff Voltage

Stabilizing Surface Chemistry and Texture of Single-Crystal Ni-rich Cathodes for Li-ion Batteries

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

Atomic-scale Tuned Interface of Nickel-Rich Cathode for Enhanced Electrochemical Performance in Lithium-Ion Batteries

Engineering of cobalt-free Ni-rich cathode material by dual-element modification to enable 4.5 V-class high-energy-density lithium-ion batteries