Abstract:Single-crystalline LiNi0.6Co0.2Mn0.2O2 cathodes have received great attention due to their high discharge capacity and better electrochemical performance. However, the single-crystal materials are suffering from severe lattice distortion and electrode/electrolyte interface side reactions when cycling at high voltage. Herein, a unique single-crystal LiNi0.6Co0.2Mn0.2O2 with Al and Zr doping in the bulk and a self-formed coating layer of Li2ZrO3 in the surface has been constructed by a facile strategy. The optimized cathode material exhibits excellent structural stability and cycling performance at room/elevated temperatures after long-term cycling. Specifically, even after 100 cycles (1C, 3.0–4.4 V) at 50 °C, the capacity retention for the Al and Zr co-doped sample reaches 92.1%, which is much higher than those of the single Al-doped (85.4%), single Zr-doped (87.1%), and bare samples (76.3%). The characterization results and first-principles calculations reveal that the excellent electrochemical properties are attributed to the stable structure and interface, in which the Al and Zr co-doping hinders cation mixing and suppresses detrimental phase transformations to reduce internal stress and mitigate microcracks, and the coating layer of Li2ZrO3 can protect the surface and suppress interfacial parasitic reactions. Overall, this work provides important insights into how to simultaneously build a stable bulk structure and interface for the single-crystal NCM cathode via a facile preparation process.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c10799.XRD pattern, Rietveld refinement data and SEM images for Al-NCM and Zr-NCM; XPS spectrum for NCM and AZ-NCM; DFT calculation models; binding energy of different calculation structures; charge–discharge profiles and dQ dV–1 profiles of NCM and AZ-NCM; and resistance values for the NCM and AZ-NCM electrodes (PDF)This article has not yet been cited by other publications.

Engineering a Robust Interface on Ni-Rich Cathodes via a Novel Dry Doping Process toward Advanced High-Voltage Performance

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Stabilizing high-Ni cathodes with gradient surface Ti-enrichment

Highly Stabilized Ni‐Rich Cathodes Enabled by Artificially Reversing Naturally‐Formed Interface

In-situ Ti4+-doped modification of layer-structured Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials for high-energy lithium-ion batteries

Enhancing the Structural Stability and Electrochemical Performance of High-Nickel Cathode Materials through Ti Doping with an Exothermic Non-oxide Precursor

Regulation of Interface Ion Transport by Electron Ionic Conductor Construction toward High‐Voltage and High‐Rate LiNi0.5Co0.2Mn0.3O2 Cathodes in Lithium Ion Battery

Constructing Stable Interface Layer for Boosting High-Voltage Cycling Performance of Single-Crystal Ni-rich Cathodes

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Modifying surface chemistry and stress concentration to enable highly stable ultrahigh-Ni cathodes

Stabilizing effects of atomic Ti doping on high-voltage high-nickel layered oxide cathode for lithium-ion rechargeable batteries

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Dual-Modified Compact Layer and Superficial Ti Doping for Reinforced Structural Integrity and Thermal Stability of Ni-Rich Cathodes

Pushing High Capacity with Thermodynamically Stable Interface for Single Crystalline Nickel-rich Cathode

Enabling Structure/Interface Regulation for High Performance Ni‐Rich Cathodes

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Improving the Performance of LiNi0.925Co0.065Mn0.01O2 via Ti4+& Nb5+ Co-Modifications

Dual-Element-Modified Single-Crystal LiNi 0.6 Co 0.2 Mn 0.2 O 2 as a Highly Stable Cathode for Lithium-Ion Batteries

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

Enhancing the Electrochemical Properties of Nickel-Rich Cathode by Surface Coating with Defect-Rich Strontium Titanate