Abstract:Surface stability of Ni-rich NCM cathode material is improved by NTESA precursor.Thermal treatment of NCM cathode material with NTESA forms artificial CEI layer.Artificially embedded CEI layer inhibits electrolyte decomposition during cycling.NTESA-modified NCM cathode exhibits improved cycling retention after 100 cycles.Systematic spectroscopic analyses prove undesired reactions are well suppressed.Layered lithium nickel-cobalt-manganese oxides (NCM) have been highlighted as advanced cathode materials for lithium-ion batteries (LIBs); however, their low interfacial stability must be overcome to ensure stable cycling performance of the cell. In this work, we propose a one-step surface modification method that uses a task-specific precursor, N,N,N,N-tetraethylsulfamide (NTESA), to improve interfacial stability of Ni-rich NCM cathode materials. The unstable surface properties of Ni-rich NCM cathode material are improved by embedding an artificial cathode-electrolyte interphase (CEI) layer on the cathode surface by heat treatment of the Ni-rich NCM cathode material with an NTESA precursor at low temperature. Our material analyses indicate that this approach allows the formation of amine- and sulfone-functionalized CEI layers on the surface of Ni-rich NCM cathode material without changing the layered structure of the cathode material. NTESA-functionalized Ni-rich NCM cathode materials exhibit improved cycling retention after 100 cycles: for example, a cell cycled with a 3.0 NTESA-modified NCM811 cathode presents the highest retention ratio of 88.3%, whereas a cell cycled with a non-functionalized NCM811 cathode suffers from rapid fading of the cycling performance (68.4%). Our additional SEM, XPS, and EIS analyses indicate that electrolyte decomposition is suppressed during electrochemical cycling, thereby leading to smaller increases in the internal resistances. ICP-MS analyses of the cycled anodes also indicate that the NTESA-based artificial CEI layer inhibits the dissolution of transition metal components from the Ni-rich NCM cathode materials, thereby contributing to an improved overall electrochemical performance of the cell.Download : Download high-res image (172KB)Download : Download full-size image

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li + -conducting cathode-electrolyte interphase

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

An Interphase Engineering Method of Stabilizing Ni‐rich Cathode in Lithium‐ion Batteries by A Nucleophilic‐based Additive

Pre-Deoxidation of Layered Ni-Rich Cathodes to Construct a Stable Interface with Electrolyte for Long Cycling Life

Chemo-mechanical stable cathode interphase via interface in-situ catalytic-conversion integrated design for all solid-state batteries

Dually-functionalized Ni-rich layered oxides for high-capacity lithium-ion batteries

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Anchoring Interfacial Nickel Cations by Tunable Coordinative Structure for Highly Stabilized Nickel-Rich Layered Oxide Cathodes

Interphase Modification of Li(Ni0.5Co0.2Mn0.3)O2 Based Lithium Battery Electrode Materials by Depolarized and Pre-Lithiation for High Capacity and Cycling Performance

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Surface-targeted functionalization of nickel-rich cathodes through synergistic slurry additive approach with multi-level impact using minimal quantity

Stabilizing the Interphase in an Ultra-High-Nickel Cathode Enabling High-Performance Lithium-Ion Batteries

Constructing Stable Interface Layer for Boosting High-Voltage Cycling Performance of Single-Crystal Ni-rich Cathodes

Mixed-conducting Interlayer Boosting the Electrochemical Performance of Ni-rich Layered Oxide Cathode Materials for Lithium Ion Batteries

In-situ Formation of Hybrid Li3PO4-AlPO4-Al(PO3)3 Coating Layer on LiNi0.8Co0.1Mn0.1O2 Cathode with Enhanced Electrochemical Properties for Lithium-Ion Battery

(Digital Presentation) Simultaneous Transforming Residual Lithium Compounds and Stabilizing Surface Lattice Oxygen for Ni-Rich Cathode Via Atomic Layer Deposition and Post-Annealing

Simultaneous modulation of cathode/anode and electrolyte interfaces via a nitrile additive for high-energy-density lithium-metal batteries

Nanoscale operation of Ni-Rich cathode surface by polycrystalline solid electrolytes Li3.2Zr0.4Si0.6O3.6 coating