Abstract:Layered transition-metal oxides have served as the mainstream cathode materials for high-energy batteries due to their large theoretical capacity (≈280mAh/g),However, the actual usable capacity is much lower than the promised theoretical value. Additional, poor cycling performance and the first-cycle Coulombic efficiency, for which Mn(II)-dissolution, its immobilization in solid electrolyte interface (SEI), oxidation of electrolytes by Ni, and other parasitic process thereat have been held responsible, weight against their applications.. Here we report a significant enhancement of cathode capacity utilization through a novel concept of material design. By embedding Li(Ni0.5Co0.2Mn0.3)O2 in single wall carbon nanotube (CNT) network, a high charge/discharge reversible capacity up to about 250 mAh/g was obtained between 3.0-4.8V. Furthermore, to maintain this high capacity in long-term cycling, we proposes a unique “pre-lithiation process”, which brought the cathode to low potentials before regular cycling and led to an interphase that is normally formed only on anode surfaces. The complete coverage of cathode surface by this ~40 nm-thick interphase effectively prevented Mn(II) dissolution and minimized the side reactions of Ni, Co and Mn at the NMC interface during the subsequent cycling process. More importantly, such “pre-lithiation” process activated a structure containing two Li layers near the surface of NMC532 particles, as verified by XRD and first principle calculation. Hence, a new cathode material of both high capacity with depolarized structure; and excellent cycling performance was generated.

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li + -conducting cathode-electrolyte interphase

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Surface Modification and Electrochemical Properties of Li-Rich Layered Cathode Materials for Lithium-Ion Batteries

Tailoring Grain Boundary Structures and Chemistry of Ni-rich Layered Cathodes for Enhanced Cycle Stability of Lithium-Ion Batteries

An Artificial Solid Electrolyte Interphase Enables the Use of a LiNi0.5 Mn1.5 O4 5 V Cathode with Conventional Electrolytes

An Interphase Engineering Method of Stabilizing Ni‐rich Cathode in Lithium‐ion Batteries by A Nucleophilic‐based Additive

Mixed-conducting Interlayer Boosting the Electrochemical Performance of Ni-rich Layered Oxide Cathode Materials for Lithium Ion Batteries

Bifunctional Self-Assembled Molecular Layer Enables Stable Ni-rich Cathodes

Surface-targeted functionalization of nickel-rich cathodes through synergistic slurry additive approach with multi-level impact using minimal quantity

An artificial layer enables in situ generation of a homogeneous inorganic/organic composite solid electrolyte interphase for stable lithium metal batteries

Construction of Inorganic-Rich Cathode Electrolyte Interphase on Co-Free Cathodes.

A gradient oxy-thiophosphate-coated Ni-rich layered oxide cathode for stable all-solid-state Li-ion batteries

Electrolytes Polymerization‐Induced Cathode‐Electrolyte‐Interphase for High Voltage Lithium‐Ion Batteries

Interphase Modification of Li(Ni0.5Co0.2Mn0.3)O2 Based Lithium Battery Electrode Materials by Depolarized and Pre-Lithiation for High Capacity and Cycling Performance

Olivine-based Nano-Filling Layer Empowering Ni-rich Layered Cathodes with Enhanced Surface Stability and Thermal Shock Resistance

Stabilizing the Interphase in an Ultra-High-Nickel Cathode Enabling High-Performance Lithium-Ion Batteries

High-voltage and high-safety nickel-rich layered cathode enabled by a self-reconstructive cathode/electrolyte interphase layer

Phase behavior tuning enable high-safety and crack-free Ni-rich layered cathode for lithium-ion battery

Simultaneous modulation of cathode/anode and electrolyte interfaces via a nitrile additive for high-energy-density lithium-metal batteries

Surface enrichment and diffusion enabling gradient-doping and coating of Ni-rich cathode toward Li-ion batteries

In-situ construction of a thermodynamically stabilized interface on the surface of single crystalline Ni-rich cathode materials via a one-step molten-salt route