Abstract:Ni‐rich layered cathode with aluminum and indium co‐modified crystal and surface structures achieves a simultaneous suppression of cracking and resistive surface film growth, thus gaining remarkably enhanced electrochemical performance compared to the pristine counterpart. Ni‐rich layered oxides are considered as promising cathodes for next‐generation lithium‐ion batteries. However, they still suffer microstructure and surface instability particularly under high operating voltage, leading to rapid capacity fading and battery failure. In this context, Ni‐rich layered cathodes (LiNixCoyMn1−x−yO2; LNCM) with aluminum and indium co‐modified crystal and surface structures are developed by a simple one‐pot calcination approach. Battery tests show that the Al and In co‐modified LNCM electrodes demonstrate remarkably enhanced rate capability and cycling stability compared with the pristine LNCM, Al‐doped LNCM, and In‐modified LNCM counterparts. Further characterizations reveal a simultaneous suppression of cracking and resistive film growth. The improved microstructural and surface stability originate from the synergistic functions of Al and In co‐modification. The incorporation of Al3+ into transition metal slab significantly reduces the Li+/Ni2+ antisite, which noticeably mitigates the undesired layer to rock‐salt phase transformation. The In3+ dopant dispersed in Li interslab can dissipate the anisotropic lattice strain, enabling greatly improved reversibility of H2↔H3 phase transition occurred in delithiation‐lithiation processes. Meanwhile, the synchronously formed LiInO2 adherent coatings deplete lithium residues, facilitate lithium‐ion transfer, and resist electrolyte corrosion. Microstructure and surface engineering through Al and In co‐modification offer a promising design strategy for Ni‐rich layered cathodes.

Phase behavior tuning enable high-safety and crack-free Ni-rich layered cathode for lithium-ion battery

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Chemical-Mechanical Effects in Ni-Rich Cathode Materials

A new high-valence cation pillar within the Li layer of compositionally optimized Ni-rich LiNi 0.9 Co 0.1 O 2 with improved structural stability for Li-ion battery

Surface enrichment and diffusion enabling gradient-doping and coating of Ni-rich cathode toward Li-ion batteries

Enhanced Li-ion Intercalation Kinetics and Lattice Oxygen Stability in Single-Crystalline Ni-rich Co-poor Layered Cathodes

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Enhancing chemomechanical stability and high-rate performance of nickel-rich cathodes for lithium-ion batteries through three-in-one modification

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Phase Behavior during Electrochemical Cycling of Ni‐Rich Cathode Materials for Li‐Ion Batteries

Simultaneous enhancement of ordered layered structure and inhibition of micro-cracks via porous structure to improve stability for Ni-rich cathode

In-situ Ti4+-doped modification of layer-structured Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials for high-energy lithium-ion batteries

Dual-Modified Compact Layer and Superficial Ti Doping for Reinforced Structural Integrity and Thermal Stability of Ni-Rich Cathodes

Elevating cycle stability of Ni-rich NCM811 cathode via single-crystallization integrating dual-modification strategy for lithium-ion batteries

Aluminum and Indium Co‐Modified Ni‐Rich Layered Cathode with Enhanced Microstructure and Surface Stability for Lithium‐Ion Batteries

Resolving atomic-scale phase transformation and oxygen loss mechanism in ultrahigh-nickel layered cathodes for cobalt-free lithium-ion batteries

Enabling high-rate discharge capability and stable cycling for Ni-rich layered cathodes via multi-functional modification strategy

Building a Self‐Adaptive Protective Layer on Ni‐Rich Layered Cathodes to Enhance the Cycle Stability of Lithium‐Ion Batteries

Removing the Intrinsic NiO Phase and Residual Lithium for High-Performance Nickel-Rich Materials

Towards Rational Design of High Performance Ni-rich Layered Oxide Cathodes: the Interplay of Borate-Doping and Excess Lithium