Abstract:Lithium batteries composed of Li-metal anodes, ester-based electrolytes, and Ni-rich Li[NixCoyMn1–x–y]O2 (NCM) cathodes have emerged as potential candidates for next-generation energy storage technologies. However, identifying suitable electrolytes, which are highly compatible with NCM cathodes and simultaneously form stable solid electrolyte interphase (SEI) layers on Li-metal anode surfaces, is a significant challenge. Herein, we introduce a new electrolyte additive of P2S5-saturated CS2 (PSC) solution (1 wt.%) to modify the ester-based electrolyte, and then, an ionically conductive SEI can be generated to stabilize the Li-metal significantly. We discover that the P2S5 can be solvated by the CS2, in which the solution can facilitate the in situ formation of a stable SEI containing inorganic Li–P–S compounds (Li-ion conductors, likely Li3PS4), enabling the dendrite-free and highly reversible Li-metal anode. Then, a practical battery, configured by a Li-metal anode, PSC-modified electrolyte, and a Li[Ni0.73Co0.10Mn0.15Al0.02]O2 cathode, demonstrates high capacity, cycling stability, and Coulombic efficiency over 1500 cycles.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00661?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00661</a>.Experimental methods. NMR spectra, equivalent circuit for EIS, contact angle image, linear sweep voltammetry. Postmortem SEM images and XPS analysis (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00661/suppl_file/nz1c00661_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

An Artificial Solid Electrolyte Interphase Enables the Use of a LiNi0.5 Mn1.5 O4 5 V Cathode with Conventional Electrolytes

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Enhanced Stability at the Electrode-Electrolyte Interface in Ionic Liquid Electrolyte for 5 V Lithium-Ion Rechargeable Batteries

Artificial Solid Electrolyte Interphase to Address the Electrochemical Degradation of Silicon Electrodes

Cycling Stability of 5V LiMn1.5Ni0.5O4 Spinel Particles Coated with a Thin Film Mixed Conductor

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

Unraveling the stable cathode electrolyte interface in all solid-state thin-film battery operating at 5V

An artificial layer enables in situ generation of a homogeneous inorganic/organic composite solid electrolyte interphase for stable lithium metal batteries

An Inorganic‐Rich Solid Electrolyte Interphase for Advanced Lithium‐Metal Batteries in Carbonate Electrolytes

Interphase Stabilization of LiNi0.5 Mn1.5 O4 Cathode for 5 V-Class All-Solid-State Batteries

Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries

Designing In-Situ-Formed Interphases Enables Highly Reversible Cobalt-Free LiNiO2 Cathode for Li-ion and Li-metal Batteries

Toward a High-Voltage Practical Lithium Ion Batteries with Ultraconformal Interphases and Enhanced Battery Safety

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Stable Anion‐Derived Solid Electrolyte Interphase in Lithium Metal Batteries

Formation of an Artificial Cathode–Electrolyte Interphase to Suppress Interfacial Degradation of Ni-Rich Cathode Active Material with Sulfide Electrolytes for Solid-State Batteries

Improving the Durability of Lithium-Metal Anode via In situ Constructed Multilayer SEI

In situ epitaxial growth and electrochemical conversion of LiNi0.5Mn1.5O4 thin layer on Ni-rich cathode materials for high voltage lithium-ion batteries

Long-Lasting Solid Electrolyte Interphase for Stable Li-Metal Batteries

G‐c3n4 Derivative Artificial Organic/Inorganic Composite Solid Electrolyte Interphase Layer for Stable Lithium Metal Anode

Engineering Stable Decomposition Products on Cathode Surfaces to Enable High Voltage All‐Solid‐State Batteries