Abstract:Co-free Li-rich Mn-based layered oxides (LRMLOs) are attractive cathode materials for lithium-ion batteries due to their low cost, high energy density and environmental friendliness. However, they also suffer from the drawbacks of low initial Coulombic efficiency, rapid voltage fading and capacity decay, and poor rate performance as the general LRMLO cathode, which prevent their practical applications. In the present work, a multilayer surface coating composed of Li 2 B 4 O 7 /B 2 O 3 and a spinel heterostructure rich-in oxygen vacancies are in-situ formed at the surface of the Co-free LRMLO particles by a facile thermal reduction treatment with NH 4 B 5 O 8 . The multilayer surface improves greatly the electron and ion conductivities, and plays significantly synergistic roles on suppressing oxygen release, reducing the dissolution of Mn and Ni elements, retarding the structure transformation from layered to spinel, and preventing the side reaction of the active material with electrolyte during cycling for the cathodes. As a result, the overall electrochemical properties of the cathodes are significantly improved. With an optimized addition of 10 wt% NH 4 B 5 O 8 , the initial Coulombic efficiency of the cathode is as high as 90.0%, and a capacity of 275 mAh g -1 is obtained at 0.1 C (1 C = 200 mA g -1 ) with the capacity retention of 98.5% after 100 cycles. A capacity of 194 mAh g -1 is maintained after 300 cycles at 1 C, with the capacity retention of 92.8%. A capacity of 117 mAh g -1 is obtained at a high rate of 20 C. In addition, the voltage fading during cycling is also greatly inhibited. The structure evolution of the cathode material during cycling is systematically investigated and the mechanism for the improved electrochemical properties is proposed. The present work provides a new surface structure design strategy and the method for enhancing the overall electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes.

Surface Modification and Electrochemical Properties of Li-Rich Layered Cathode Materials for Lithium-Ion Batteries

Improving the Electrochemical Performance of Li-rich Li1.2Ni0.2Mn0.6O2 by Using Ni-Mn Oxide Surface Modification

Research on LiNi_xMn_(2-x)O_4 Surface Modification of LiCoO_2 As Cathode Materials for Li-ion Batteries

Can surface modification be more effective to enhance the electrochemical performance of lithium rich materials?

Enhanced interfacial reaction interface stability of Ni-rich cathode materials by fabricating dual-modified layer coating for lithium-ion batteries

Reinforcing the Stability of Cobalt-free Lithium-rich Layered Oxides via Li-poor Ni-rich Surface Transformation

Surface modification single crystal Li-rich Li1.2Mn0.54Ni0.13Co0.13O2 as high performance cathode materials for Li-ion batteries

Surface Modification Driven Initial Coulombic Efficiency and Rate Performance Enhancement of Li1.2Mn0.54Ni0.13Co0.13O2 Cathode

A novel surface-heterostructured Li<sub>1.2</sub>Mn<sub>0.54</sub>Ni<sub>0.13</sub>Co<sub>0.13</sub>O<sub>2</sub>@Ce<sub>0.8</sub>Sn<sub>0.2</sub>O<sub>2−σ</sub> cathode material for Li-ion batteries with improved initial irreversible capacity loss

Surface modification of Li-rich layered Li1.2Mn0.54Ni0.13Co0.13O2 oxide with Fe2O3 as cathode material for Li-ion batteries

A Novel Surface-Heterostructured Li1.2Mn0.54Ni0.13Co0.13O2@Ce0.8Sn0.2O2−σ Cathode Material for Li-ion Batteries with Improved Initial Irreversible Capacity Loss

Stabilizing the Oxygen Ions and Alleviating the Surface Structure Evolution of Li-Excess Layered Cathode for Advanced Lithium-Ion Batteries

Surface-Modification of Doping and Coating Li1.2Ni0.2Co0.08Mn0.52O2 as a Long Life Cathode Material of Lithium-Ion Battery by Sodium Salt Treatment

A stable lithium-rich surface structure for lithium-rich layered cathode materials

Bulk and surface reconstructed Li-rich Mn-based cathode material for lithium ion batteries with eliminating irreversible capacity loss

Significant Enhancement of the Capacity and Cycling Stability of Lithium-Rich Manganese-Based Layered Cathode Materials via Molybdenum Surface Modification

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Optimizing Both Bulk and Surface Structure of Li‐Rich Layered Cathodes for Long‐Life and Safe Li‐Ion Batteries

Multifunctional surface structure with enhanced electron and ion conductivities for superior electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes

The Effects of Surface Polyanions on the Lithium-Excess Layered Cathode

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material