Abstract:Excellent high voltage performance under 4.7 V for 1000 cycles with LiNi0.8Co0.1Mn0.1O2 cathode and 200 cycles with Li1.2Mn0.58Ni0.08Co0.14O2 cathode by optimizing electrolyte to form a robust inorganic/organic/inorganic‐rich architecture cathode‐electrolyte interphase and inorganic/organic‐rich architecture anode‐electrolyte interphase (AEI), which suppresses the adverse electrolyte oxidation and transition metal dissolution, significantly reduces the chemical attacks to AEI. Li‐rich and Ni‐rich layered oxides as next‐generation high‐energy cathodes for lithium‐ion batteries (LIBs) possess the catalytic surface, which leads to intensive interfacial reactions, transition metal ion dissolution, gas generation, and ultimately hinders their applications at 4.7 V. Here, robust inorganic/organic/inorganic‐rich architecture cathode‐electrolyte interphase (CEI) and inorganic/organic‐rich architecture anode‐electrolyte interphase (AEI) with F‐, B‐, and P‐rich inorganic components through modulating the frontier molecular orbital energy levels of lithium salts are constructed. A ternary fluorinated lithium salts electrolyte (TLE) is formulated by mixing 0.5 m lithium difluoro(oxalato)borate, 0.2 m lithium difluorophosphate with 0.3 m lithium hexafluorophosphate. The obtained robust interphase effectively suppresses the adverse electrolyte oxidation and transition metal dissolution, significantly reduces the chemical attacks to AEI. Li‐rich Li1.2Mn0.58Ni0.08Co0.14O2 and Ni‐rich LiNi0.8Co0.1Mn0.1O2 in TLE exhibit high‐capacity retention of 83.3% after 200 cycles and 83.3% after 1000 cycles under 4.7 V, respectively. Moreover, TLE also shows excellent performances at 45 °C, demonstrating this inorganic rich interface successfully inhibits the more aggressive interface chemistry at high voltage and high temperature. This work suggests that the composition and structure of the electrode interface can be regulated by modulating the frontier molecular orbital energy levels of electrolyte components, so as to ensure the required performance of LIBs.

Both Interface and Bulk Stable LiNi 0.5 Mn 1.5 O 4 Cathodes for High-Energy Li-Ion Batteries

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

In-situ Ti4+-doped modification of layer-structured Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials for high-energy lithium-ion batteries

Lanthanum doping and surface Li 3 BO 3 passivating layer enabling 4.8 V nickel-rich layered oxide cathodes toward high energy lithium-ion batteries

Stabilizing reaction interface in Ni-rich layered oxides cathode for high-performance lithium-ion batteries at a high cutoff voltage

Trace Doping of Multiple Elements Enables Stable Cycling of High Areal Capacity LiNi0.5Mn1.5O4 Cathode

B-doped and La4NiLiO8-coated Ni-rich cathode with enhanced structural and interfacial stability for lithium-ion batteries

N-doped engineering of a high-voltage LiNi0.5Mn1.5O4 cathode with superior cycling capability for wide temperature lithium-ion batteries

Surface to Bulk Synergetic Modulation of Nickel‐Rich LiNi0.83Co0.06Mn0.11O2 via a Three‐in‐One Approach for Long‐Cycle Lithium‐Ion Batteries

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

Interface Engineering via Regulating Electrolyte for High‐Voltage Layered Oxide Cathodes‐Based Li‐Ion Batteries

Crystallographic‐Site‐Specific Structural Engineering Enables Extraordinary Electrochemical Performance of High‐Voltage LiNi 0.5 Mn 1.5 O 4 Spinel Cathodes for Lithium‐Ion Batteries

Pre-Deoxidation of Layered Ni-Rich Cathodes to Construct a Stable Interface with Electrolyte for Long Cycling Life

Bulk-to-surface engineering allows for extremely stable co-free Ni-rich cathodes for rechargeable batteries

Enhancing Surface and Crystal Stability of the Ni-High NCA Cathode for High-Energy and Durable Lithium-Ion Batteries

Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 As a Highly Stable Cathode for Lithium-Ion Batteries.

Architecting “Li-rich Ni-rich” core-shell layered cathodes for high-energy Li-ion batteries

Understanding Improved Stability of Co-free Ni-rich Single Crystal Cathode Materials by Combined Bulk and Surface Modifications

Stabilizing the Interphase in an Ultra-High-Nickel Cathode Enabling High-Performance Lithium-Ion Batteries