Abstract:LiNi0.8Co0.1Mn0.1O2 (NCM811) material, as the promising cathode candidate for next-generation high-energy lithium-ion batteries, has gained considerable attention for extremely high theoretical capacity and low cost. Nevertheless, the intrinsic drawbacks of NCM811 such as unstable structure and inevitable interface side reaction result in severe capacity decay and thermal runaway. Herein, a novel polyimide (denoted as PI-OmDT) constructed with the highly polar and micro-branched crosslinking network is reported as a binder material for NCM811 cathode. The micro-branched crosslinking network is achieved by using 1,3,5-Tris(4-aminophenoxy) benzene (TAPOB) as a crosslinker via condensation reaction, which endows excellent mechanical properties and large free volume. Meanwhile, the massive polar carboxyl (−COOH) groups provide strong adhesion sites to active NCM811 particles. These functions of PI-OmDT binder collaboratively benefit to forming the mechanically robust and homogeneous coating layer with rapid Li+ diffusion on the surface of NCM811, significantly stabilizing the cathode structure, suppressing the detrimental interface side reaction and guaranteeing the shorter ion-diffusion and electron-transfer paths, consequently enhancing electrochemical performance. As compared to the NCM811 with PVDF binder, the NCM811 using PI-OmDT binder delivers a superior high-rate capacity (121.07 vs. 145.38 mAh g−1) at 5 C rate and maintains a higher capacity retention (80.38% vs. 91.6%) after 100 cycles at 2.5–4.3 V. Particularly, at the high-voltage conditions up to 4.5 and 4.7 V, the NCM811 with PI-OmDT binder still maintains the remarkable capacity retention of 88.86% and 72.5% after 100 cycles, respectively, paving the way for addressing the high-voltage operating stability of the NCM811 cathode. Moreover, the full-charged NCM811 cathode with PI-OmDT binder exhibits a significantly enhanced thermal stability, improving the safety performance of batteries. This work opens a new avenue for developing high-energy NCM811 based lithium-ion batteries with long cycle-life and superior safety performance using a novel and effective binder.

Polyimides: Stable Cathode Active Material Coatings at High Voltage

Polyimide Encapsulated Lithium-Rich Cathode Material for High Voltage Lithium-Ion Battery

Surface modification enabling 4.7 V Nickel-rich layered cathode with superior long-term cyclability via novel functional polyimide binders

A Perspective on Coatings to Stabilize High-Voltage Cathodes: LiMn1.5Ni0.5O4 with Sub-Nanometer Lipon Cycled with LiPF6 Electrolyte

Novel polyimide binders integrated with soft and hard functional segments ensuring long-term high-voltage operating stability of high-energy NCM811 lithium-ion batteries up to 4.5 V

Coupling-Agent-Coordinated Uniform Polymer Coating on LiNi<sub>0.6</sub>Co<sub>0.2</sub>Mn<sub>0.2</sub>O<sub>2</sub> for Improved Electrochemical Performance at Elevated Temperatures

Polyvinylpyrrolidone-Induced Uniform Surface-Conductive Polymer Coating Endows Ni-Rich LiNi0.8Co0.1Mn0.1O2 with Enhanced Cyclability for Lithium-Ion Batteries.

Molecular-Scale Polysiloxane-Crosslinking Hydrophobic Coating Boosting High-Performance Ni-Rich Cathode in Damp-Heat Environment

Novel polyimide binder for achieving high-rate capability and long-term cycling stability of LiNi0.8Co0.1Mn0.1O2 cathode via constructing polar and micro-branched crosslinking network structure

High-voltage LiNi0.5Mn1.5O4 Thin Film Cathodes Stabilized by LiPON Solid Electrolyte Coating to Enhance Cyclic Stability and Rate Capability

A Polyimide Cathode with Superior Stability and Rate Capability for Lithium-Ion Batteries

Enhanced high-rate and cyclic performance of Co-free and Ni-rich LiNi0.95Mn0.05O2 cathodes by coating electronic/Li+ conductive PANI-PEG layer

Coating Strategies of Ni-rich Layered Cathode in LIBs

Electrolytes Polymerization‐Induced Cathode‐Electrolyte‐Interphase for High Voltage Lithium‐Ion Batteries

Realization of a High-Voltage and High-Rate Nickel-Rich NCM Cathode Material for LIBs by Co and Ti Dual Modification

Improving electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode for Li-ion batteries by dual-conductive coating layer of PPy and LiAlO2

Enhanced cyclic stability of Co-free and Ni-rich LiNi0.95Mn0.05O2 cathodes by coating flexible and electronically conductive PPy layer

Protective and ion conductive: High-Rate Ni-Rich cathode with enhanced cyclic stability via One-Step bifunctional dual-layer coating

Manipulation of an ionic and electronic conductive interface for highly-stable high-voltage cathodes

Stabilizing reaction interface in Ni-rich layered oxides cathode for high-performance lithium-ion batteries at a high cutoff voltage

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery