Abstract:Understanding the crystallization mechanism of amorphous metal-oxide thin films remains of importance to avoid the deterioration of multifunctional flexible electronics. We derived the crystallization mechanism of indium-based functional amorphous oxide films by using in situ X-ray diffraction (XRD) and transmission electron microscopy (TEM) measurements. Crystallization begins with surface nucleation, especially at low annealing temperatures, and proceeds simultaneous nucleation and growth in the bulk. Three-dimensional crystal growth in the film was observed when the crystallite size was sufficiently smaller than the film thickness. When the growing crystallites reached the film surface, the crystallization was dominated by two- or lower-dimensional growth. Such crystallization can be explained within the framework of the modified Avrami theory and can be varied for tailoring the electrical properties of the amorphous In2O3 film. After tailoring the film crystallinity and crystallite size, the carrier mobility was improved to >100 cm2/V·s in 30 min. Our results show that a carrier mobility of >90 cm2/V·s can be implemented for the In2O3 film with a crystallinity of >40% and a crystallite size of >70 nm by an optimized annealing process. The incorporation of Ga element into amorphous In2O3 films obviously increases the activation energy of nucleation and migration. In contrast, Sn dopants can promote the crystal growth. This is attributed to two kinds of migration mechanisms during the annealing in air, one of which is the dominant migration mechanism of oxygen interstitials in crystallized indium–tin oxide (ITO) films and the other dominated by oxygen vacancies in In2O3 and IGO films. Combining the modified Avrami theory with TEM observations, we predicted the structural evolution kinetics for indium-based amorphous oxide films and gained new insights for understanding the temporal structure–functionality relationship during crystallization.This article has not yet been cited by other publications.

Nucleation and grain growth in low-temperature rapid solid-phase crystallization of hydrogen-doped indium oxide

Microstructure Optimization and Optical and Interfacial Properties Modulation of Sputtering-Derived Hfo2 Thin Films by Tio2 Incorporation

Temporal Evolution of Microscopic Structure and Functionality during Crystallization of Amorphous Indium-Based Oxide Films

Influence of Grain Boundary Scattering on the Field-Effect Mobility of Solid-Phase Crystallized Hydrogenated Polycrystalline In2O3 (In2O3:H)

Nondegenerate Polycrystalline Hydrogen-Doped Indium Oxide (InO x:H) Thin Films Formed by Low-Temperature Solid-Phase Crystallization for Thin Film Transistors

Crystallization of amorphous silicon thin films: The effect of rapid thermal processing pretreatment

Key Sputtering Parameters for Precursor In 2 O 3 Films to Achieve High Carrier Mobility

Thermal History Effect on the Nucleation of Oxygen Precipitates in Germanium Doped Cz-silicon Studied by High-Energy X-ray Diffraction

On the Formation of Solid State Crystallized Intrinsic Polycrystalline Germanium Thin Films

Oxygen Precipitation in Heavily Phosphorus-doped Czochralski Silicon

Low-temperature Annealing of Polycrystalline Si/sub 1-X/ge/sub X/ after Dopant Implantation

High-mobility hydrogenated polycrystalline In2O3 (In2O3:H) thin-film transistors

Appearance of amorphous phase in crystalline In-Y codoped ZnO thin films

Low-temperature crystallization of indium oxide thin films with a photoactivable additive

Epitaxial Growth of “Strain-Free” Indium Oxide Films on (111) Yttria-Stabilized Zirconia by Metal-Organic Chemical Vapor Deposition

Interface Processing of Amorphous–Crystalline Silicon Heterojunction Prior to the Formation of Amorphous-to-Nanocrystalline Transition Phase

Effects of Indium Doping on the Crystallographic, Morphological, Electrical, and Optical Properties of Highly Crystalline ZnO Films

Phase control for indium oxide nanoparticles

Sputtering deposition of dense and low-resistive amorphous In2O3: Sn films under ZONE-T conditions of Thornton's structural diagram

Can Spherulitic Growth Rate Accelerate Before Impingement for a Semicrystalline Polymer During the Isothermal Crystallization Process?

Effect of crystalline structure on optical and electrical properties of IWOH films fabricated by low-damage reactive plasma deposition at room temperature