Abstract:International Journal of Modern Physics B, Ahead of Print. A simple approach dealing with thermal oxidation at atmospheric pressure was used to synthesize copper oxide nanowires (CuO-NWs) on copper substrate. The vertically oriented CuO-NWs were used for further subjected to deposition of ultrathin layer (∼20[math]nm) of lanthanum hexaboride (LaB[math] using the electron beam evaporation technique. The observation of the characteristic vibrational mode of LaB6 in the Raman spectrum of LaB6-coated CuO-NWs (LaB6@CuO-NWs) revealed the existence of LaB6 in the deposited sample. Furthermore, confirmation of LaB6 coating on CuO-NWs was corroborated by X-ray photoelectron spectroscopy (XPS) analysis. The field electron emission (FEE) characteristics of pristine CuO-NWs and LaB6@CuO-NWs were investigated in a planer diode geometry at a base pressure of [math][math]mbar. The values of turn-on and threshold fields (defined at emission current density of 1 and 10[math][math]A/cm2, respectively) were found to be 5.4[math]V/[math]m and 1.6[math]V/[math]m (for pristine CuO-NWs emitter) and 6.75, and 2.85[math]V/[math]m (for LaB6@CuO-NWs emitter). Interestingly, a noticeably large emission current density of [math][math][math]A/cm2 has been extracted from the LaB6@CuO-NWs emitter at a relatively lower applied field of 5.8[math]V/[math]m. The Fowler–Nordheim (FN) plots of both the emitters showed nonlinear behavior, indicative of their semiconductive nature. Furthermore, both the emitters showed relatively stable emission behavior tested at a pre-set value of 1[math][math]A more than 3[math]h. The enhanced FEE behavior of LaB6@CuO-NWs emitter is attributed to the modulation of electronic properties due to LaB6-CuO interface-induced effects. Although the promising FEE behavior of LaB6@CuO-NWs emitter warrants its potential for practical applications, further improvement can be achieved via fabricating an array emitter due to CuO NWS and optimizing the thickness of LaB6 coating.

Electrical and thermal characteristics of LaB6 thermionic hollow cathodes operating in He, D2, Ar, and Xe at 4–200 Pa and 0.25–5 A cm−2

Investigation of discharge voltage characteristics of a lanthanum hexaboride heaterless hollow cathode

Performance of LaB$_6$-Emitters for Neutral Gas Pressure Gauges During Plasma Operation in the Large Helical Device

Optical floating zone growth and thermionic emission properties of La0.9Sr0.1B6 single crystal

Characterization of a LaB6 tip as a thermionically enhanced photoemitter

Fabrication of Lanthanum Hexaboride Single Nanowire Field Emitter and Their Field Emission Properties

Effect of Ba-doping on the Structural,Grain Orientation and Thermionic Emission Properties of Hexaboride GdB_6

Spark plasma sintering and characterization of bulk La1-xSrxB6 hexaborides

Boron trace amount measurement in LaB6 hollow cathode discharge using an improved actinometry method based on OES

Experimental Study On A New Lamo Cathode Of High Current Ion Source

Realization of electron transpiration cooling: LaB6 heated by a plasma glow

Experimental study on the DC discharge characteristics of wire-to-cylinder electrode configuration at high temperature

Thomson scattering measurements in the krypton plume of a lanthanum hexaboride hollow cathode in a large vacuum test facility

Improved field electron emission behavior of ultrathin lanthanum hexaboride-coated copper oxide nanowires

Modification of LaB6 with ZrO2-Al2O3-TiO2 for Improvement of Density and Mechanical and Electrical Properties

Work Function Trends and New Low Work Function Boride and Nitride Materials for Electron Emission Applications

A solid-state reaction route to prepare LaB6 nanocrystals in vacuum

Lanthanum hexaboride for solar energy applications

Emissive cathode immersed in a plasma: plasma-cathode interactions, operation and stability

Directional solidification, nanoindentation and thermionic properties of LaB6(100)-ZrB2 eutectic composite

LaB6 Nanowires and Their Field Emission Properties