Abstract:Hollow cathode discharges (HCDs), especially microhollow cathode discharges (MHCDs), have more and more applications in various fields. In order to investigate the working range of the so called “hollow cathode effect”, the experiments of low-pressure $(20\text{Pa}\leq p\leq 800\text{Pa})$ hollow cathode discharges were carried out between a plane anode and a cathode made of stainless steel with a cylindrical cavity. The diameter $D$ and depth $h$ of the cavity were 2cm and 4cm respectively. Argon was chosen as the working gas. The voltage-current characteristic curves of the hollow cathode discharges under different gas pressure $p$ were obtained. It is found that the lower boundary of working range of the hollow cathode effect in our experiment is $p\cdot D\approx 2p\cdot d_{n}$ where $d_{n}$ is the cathode layer thickness of normal glow discharge. This means that for the optimal operation of HCDs, the cavity in the cathode should be small just enough to house two opposing glow discharges, i.e., $D\approx 2d_{n}$. The value of $d_{n}$ is important. In order to determine the cathode layer thickness $d_{n}$ in the normal glow discharge, the computational method based on the iteration and the experimental method with a Langmuir probe were used in this paper. The upper boundary of the working range is that $p\cdot D$ is about several Torr.cm, less than 10 Torr.cm in general. Compared with glow discharges between parallel-plane electrodes, current density will increase largely in the hollow cathode discharges when the hollow cathode effect occurs, leading to a great increasing of the operating range of the discharge current. The similarity law of hollow cathode discharges and its physical mechanism between two similar hollow cathode discharge gaps were also studied in this paper.

Investigation of discharge voltage characteristics of a lanthanum hexaboride heaterless hollow cathode

Influence of Heating on the Discharge Characteristics of a Hollow Cathode

Current–voltage Characteristics of Hydrogen DC Plasma Torches with Different Sizes in an External Axial Magnetic Field

Ultra-low Frequency Discharge Instability of a Barium Tungsten Hollow Cathode at Lower Self-Sustaining Margin

Effect of low-frequency disturbance on the self-sustained discharge of hollow cathode

Electrical and thermal characteristics of LaB6 thermionic hollow cathodes operating in He, D2, Ar, and Xe at 4–200 Pa and 0.25–5 A cm−2

Analysis of anode surface roughness influence on heaterless hollow cathode discharge

Characterization of hollow cathode vacuum arc with axial magnetic field as a concentrated heat source

Range and Similarity of Hollow Cathode Discharge in Argon

Research of Lanthanum Hexaboride (LaB6) Hollow Cathode Heating Efficiency

Experimental Study on the Hollow Cathode Discharge

A Simple Replacement of Tungsten Filament Hot Cathodes by DC Heated LaB6 Rod and Its Noise Characteristics with Laser-Induced Fluorescence.

Transition characteristics of low-pressure discharges in a hollow cathode

Influence of Insert Structure on Hollow Cathode Discharge Characteristics

Investigation of Vacuum Arc Voltage Characteristics under Different Axial Magnetic Field Profiles

Numerical study on the effects of discharge parameters on vacuum arc plasma

Research on Electrostatic Self-focusing Lanthanum Hexaboride Electron Gun

Experimental Investigations of Enhanced Glow Based on a Pulsed Hollow-Cathode Discharge

Experimental Investigation on the Characteristics of the Plasma Jet of a Low-Current Vacuum Arc in Axial Magnetic Fields

Field Emission Characteristics of Lanthanum Hexaboride Coated Silicon Field Emitters

Impact of Exterior Electron Emission on the Self-Sustaining Margin of Hollow Cathode Discharge