Abstract:Cylindrical Al 2 O 3 /GdAlO 3 binary in situ oxide eutectic ceramic composite, with a glossy surface and high relative density, has been fabricated using the laser directed energy deposition method (LDED) with optimized process parameters. In a novel and innovative approach, infrared thermal imaging and the finite element method (FEM) have been combined for the first time to capture the temperature field distribution across different regions of the molten pool during the LDED processing of the binary oxide eutectic ceramic composite, thereby synergistically obtaining the solidification characteristics. With an increase in the scanning rate, the temperature gradient within the molten pool decreases from 3.38 × 10 5 K/m to 1.62 × 10 5 K/m, while it shows minimal variation with fluctuations of the laser power. Under the conditions of high temperature gradients and rapid non-equilibrium solidification characteristic of LDED, the Al 2 O 3 /GdAlO 3 (GAP) binary eutectic ceramic composites, which exhibit typical high melting entropy and faceted/non-faceted growth modes, exhibit complex and variable microstructure morphology. A combination of regular/irregular models, including JH (Jackson-Hunt), MK (Magnin-Kurz), GK (Guzik-Kopyciński) and TMK (Trivedi-Magnin-Kurz), is employed to investigate and predict the growth and transformation of microstructures. The JH and TMK models fairly predict the rod-like regular eutectic microstructure inside the colony and lamellar regular eutectic within adjacent layers, respectively. The "Chinese-script" irregular microstructure at the interface between the colony and the layers is consistent with the MK and GK models. The as-deposited eutectic ceramic composite presents ultra-fine microstructures, clear and strongly bonded phase interfaces with low strain energy, contributing to its microstructure stability after high temperature heat treatment at 1773 K for 200 h, and achieving a minimum microstructure coarsening rate of 0.0005 μm/h.

Directional solidification, nanoindentation and thermionic properties of LaB6(100)-ZrB2 eutectic composite

Structure and properties of La 0.6 Ce 0.3 Pr 0.1 B 6 ‐ZrB 2, a directionally solidified eutectic with different growth rates

Microstructure and mechanical properties of ZrB2-SiC eutectic composite ceramic fabricated by laser surface zone-melting: The effect of laser power and scanning speed

Directional solidification and growth characteristics of Al2O3/Er3Al5O12/ZrO2 ternary eutectic ceramic by laser floating zone melting

Modification of LaB6 with ZrO2-Al2O3-TiO2 for Improvement of Density and Mechanical and Electrical Properties

Microstructure and mechanical properties of pressure‐less sintered B4C–SiC–ZrB2–LaB6 ceramic composites

Crucible-free Fabrication of ZrB2–SiC Composite Ceramics with Ultra-Fine Eutectic Microstructure by Laser Surface Zone-Melting: the Selection of Lasers

Enhancement of the Dielectric and Energy Storage Properties of Lead-Free BNSLT Ceramics by Zr4+ Substitution into B-Sites

A TEM study of nanostructures and interfaces in the hot-press sintered ZrB2–SiC–Si3N4 composites

Seed-crystal-induced directional solidification toward Al2O3/(Y0.2Er0.2Yb0.2Ho0.2Lu0.2)3Al5O12/ZrO2 ternary eutectic ceramics

Optical floating zone growth and thermionic emission properties of La0.9Sr0.1B6 single crystal

Influence of B-site substituent Ce on thermophysical, oxygen diffusion, and mechanical properties of La2Zr2O7

Thermoelectric effects on interface demarcation and directional solidification of bismuth

A novel dual-phase high-entropy (La0.2Nd0.2Gd0.2Er0.2Yb0.2)2Zr2O7 ceramic for thermal barrier coatings applications: Preparation, microstructure, and thermo–physical properties

Predicting rapid growth behavior in solidified eutectic ceramic composites using infrared thermal imaging and thermal field simulation during laser directed energy deposition

Thermophysical and mechanical properties of dual-phase medium- and high-entropy rare-earth zirconate ceramics

Mechanical and Thermal Properties of Fine-Grained Quasi-Eutectoid (la1−yb )2zr2o7 Ceramics

Monte-Carlo Simulation of Directional Growth of Lamellar Eutectic

Lead-Bismuth Eutectic: Atomic and Micro-Scale Melt Evolution

Effect of Zr on the solid sintering process of SiBCN ceramics: Diffusion couple method experiment and DFT calculation

Effect of Zr addition on the local structure and mechanical properties of Ti–Ta–Nb–Zr refractory high-entropy alloys