Abstract:Zinc-based alloys, particularly those alloyed with elements like Ca, Cu, and others, have emerged as promising candidates for biodegradable implants. Therefore, the purpose of this study was to investigate the phase equilibrium relationship of the Ca-Cu-Zn ternary system in the Cu-Zn rich region for Zn-based biodegradable materials development. In this work, 21 and 19 samples were prepared and annealed at the temperatures of 350 and 400 °C, respectively. And Then, these samples were analyzed using analytical techniques including scanning electron microscopy (SEM) coupled with energy dispersion spectroscopy (EDS), electron probe microanalysis (EPMA), and powder X-ray diffraction analysis (XRD). The present obtained results indicate the existence of five regions exhibiting three-phase equilibrium and sixteen regions exhibiting two-phase equilibrium within these two isothermal sections. Additionally, differential scanning calorimetry (DSC) was utilized to determine the phase transition temperatures of alloys with constant values of 12 at% Cu and 40 at% Ca, respectively. Moreover, the CALPHAD method was employed to optimize the thermodynamic parameters of the phases of Ca-Cu-Zn ternary system. The model of the liquid phase was performed using the modified quasi-chemical model (MQM). The compound energy formalism (CEF) model was used to represent the Gibbs free energy of the solid phases. Finally, the experimental measured results could be reproduced well using the present obtained thermodynamic parameters.

CALPHAD-Type Reassessment of Cu-Si and Full Assessment of the Al-Cu-Si Systems

A thermodynamic description of the Al–Fe–Si system over the whole composition and temperature ranges via a hybrid approach of CALPHAD and key experiments

Thermodynamic Assessments of the Al2O3-Al4C3-AlN and Al4C3-AlN-SiC Systems

Experimental Description of the Al-Cu Binary Phase Diagram

THERMODYNAMIC ASSESSMENT OF THE Fe-Nb-Si SYSTEM

Thermodynamic description and simulation of solidification microstructures in the Cu–Mg–Zn system

An assessment of the Fe-C-Si system

Effect of Si on Phase Equilibria, Mechanical Properties and Tribological Behaviour of Al-Cu Alloy

Thermodynamic Reassessment of the C-Ni-Si System Using a Four Sublattice Model for Ordered/Disordered fcc Phases

Thermodynamic assessment of the Mo‐Si system

Phase Equilibria of Sn–Sb–Cu System

Research on the Solid-Liquid Interface Stability of Multicomponent Alloys with CALPHAD Method

CALPHAD-Type Assessment of the Pb-Se-Sn System

Thermodynamic Descriptions of the Quaternary Mg–Al–Zn–Sn System and Their Experimental Validation

Understanding off-stoichiometry of Q-phase in Al-Cu-Mg-Si alloys

Thermodynamic Reassessment of the Binary Cu-Sn, Cu-P, and Sn-P and Ternary Cu-Sn-P Systems

Prediction of Solid-Liquid Interface Stability by Coupling M-S Model with CALPHAD Method

CALPHAD based kinetic Monte Carlo simulation of clustering in binary Al-Cu alloy

Critical Evaluation and Thermodynamic Re-Optimization of the Si–P and Si–Fe–P Systems

Thermodynamic Descriptions of the Cu–Zn System

Thermodynamic study of the Ca-Cu-Zn ternary system with key experimental measurements