Abstract:The usage of low-grade ferrous scrap has increased over decades to decrease CO2 emissions and to produce steel products at a low cost. A serious problem in melting post-consumer scrap material is the accumulation of tramp elements, e.g., Cu and Sn, in the liquid steel. These tramp elements are difficult to remove during conventional steelmaking processes. Sn is considered as one of the most harmful tramp elements because, together with Cu, it sometimes induces the liquid metal embrittlement in high-temperature ferrous processing, e.g., continuous casting and hot rolling. Furthermore, the chemical interaction between Fe and Sn plays an important role in the Sn smelting process. The raw material used in the Sn smelting process is SnO2 (cassiterite), in which Fe3O4 is a gangue in the Sn ore. In the process, the reduction of Fe3O4 is unavoidable, which results in forming a Fe-Sn alloy (hardhead). The recirculation of the hardhead decreases the furnace capacity and increases the energy consumption in the smelting. The need to efficiently recover Sn from secondary resources is therefore inevitable. The CALculation of PHAse Diagrams (CALPHAD) approach helps to predict the equilibrium state of the multicomponent system. Previously reported studies of the Fe-Sn system show inconsistencies in the calculations and the experimental results. Mainly the miscibility gap in the liquid phase was under debate, as experimental data of the phase boundary are scattered. Experimental study and re-optimization of model parameters were carried out with emphasis on the correct shape of the miscibility gap. Three different experimental techniques were employed: differential scanning calorimetry, electromagnetic levitation, and contact angle measurement. The present thermodynamic model has higher accuracy in predicting the solubility of Sn in the body-centered cubic (bcc), compared to previous assessments. This is achieved by re-evaluating the Gibbs energies of the FeSn and FeSn2 compounds and the peritectic reaction related to Fe5Sn3. Also, the inconsistencies related to the miscibility gap around XSn = 0.31-0.81 were resolved. The database developed in the present study can contribute to the development of a large CALPHAD database containing tramp elements.

CALPHAD-Type Assessment of the Pb-Se-Sn System

The Study of the Pb–Se–Te Phase Diagram: Part 2 – the Thermodynamic Assessment of the Se–Te and Pb–Se–Te Systems

Experimental and Theoretical Study of the Ag-Sn-Te Phase Diagram

Phase Diagram of the Pb-Se-Sn System

Phase Equilibria of Binary Ag–Se and Ternary Ag–Pb–Se Systems

Thermodynamic modeling of the Fe-Sn system including an experimental re-assessment of the liquid miscibility gap

CALPHAD-Type Reassessment of Cu-Si and Full Assessment of the Al-Cu-Si Systems

Phase Diagram of Pb–Se–Te System I: Experimental Study

Ag-Se Phase Diagram Calculation Associating Ab−initio Molecular Dynamics Simulation

Phase Equilibria of the Sn-Sb Binary System

Thermodynamic Reassessment of the Binary Cu-Sn, Cu-P, and Sn-P and Ternary Cu-Sn-P Systems

Phase diagram of Ag-Pb-Sn system

Thermodynamic Description of the Cu–Sn System

Electrical and thermal transport properties of Pb1-xSnxSe solid solution thermoelectric materials.

Thermodynamic Properties and Phase Equilibria of Sn–Bi–Zn Ternary Alloys

Thermodynamic Modeling of the Bi-Se and Bi-Te Binary Systems

Excellent thermoelectricity performance of p-type SnSe along b axis

Phase Equilibria of Sn-Sb-Ag Ternary System (II): Calculation

Phase Equilibria of the Cu-Se-Te Ternary System

Critical Evaluation and Thermodynamic Modeling of the Li-Se and Na-Se Binary Systems Using Combined Calphad and First-Principles Calculations Method

Thermoelectric transport properties of polycrystalline SnSe alloyed with PbSe