Abstract:A two-dimensional model for the simulation of solidification microstructure in multi-component alloy systems has been developed. The model is based on a cellular automaton (CA) technique for the calculation of the evolution of solid/liquid (S/L) interface. The dynamics of the interface is controlled by temperature, solute diffusion and Gibbs-Thomson effects. The diffusion equation for the temperature with release of latent heat on the S/L interface is valid in the entire domain, and the solute diffusion equation is also used in the entire domain through potential functions. Two methods are proposed to calculate the increment of the solid fraction. The first method is based on the level rule method similar to the one proposed by Jacot et al., but without the assumption of uniform temperature on the scale of the calculation domain. The second one is based on the calculation of the S/L interface velocity, which generalizes the results of Nastac and Beltran-Sanchez et al. for two-component alloy systems. If the concentration of one of the solutes tends to zero, both proposed methods reduce to the methods in Jacot et al. and Beltran-Sanchez et al. for two component alloy systems. Mesh independency is achieved by both methods and the dendritic morphologies obtained are the same if the mesh is fine enough. However, the morphologies of equiaxed dendrites calculated by using the interface velocity tends to the stable form more easily than those calculated using the level rule method as the mesh size is refined. For two-component alloy systems, the predictions of LGK theory for the steady-state tip velocity are compared with simulated values as a function of melt undercooling, which shows good agreement at very large range of undercooling. The simulated primary arm spacing in directional solidification is compared with experimental results for Fe-Si-Mg alloys and good agreement is also observed. It is noted that both methods for computing the solid fraction can be used for any multi-component alloy systems provided that the thermodynamic data are given

Prediction of Solid-Liquid Interface Stability by Coupling M-S Model with CALPHAD Method

Research on the Solid-Liquid Interface Stability of Multicomponent Alloys with CALPHAD Method

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Prediction of Solid-Liquid Interface Stability and Dendritic Growth in Multi-Component Alloys with Calphad Method

Thermodynamic Description of Multi-Component Multi-Phase Alloys and Its Application to the Solidification Process

Comparative Analysis of Isothermal and Non-Isothermal Solidification of Binary Alloys Using Phase-Field Model

A Cellular Automaton Technique for the Modeling of Solidification Microstructure in Multi-Component Alloys

Thermodynamic description and simulation of solidification microstructures in the Cu–Mg–Zn system

Phase-field Study for the Influence of Solute Interactions on Solidification Process in Multicomponent Alloys

Examination of dendritic growth and microsegregation during solidification of Al–Li binary alloy using the phase-field simulation coupling CALPHAD data

A New Coupled Model for Alloy Solidification

Rapid Solidification of Non-Stoichiometric Intermetallic Compounds: Modeling and Experimental Verification

Phase-field Simulation of Solidification in Multicomponent Alloys Coupled with Thermodynamic and Diffusion Mobility Databases

Predicting hydrogen microporosity in long solidification range ternary Al-Cu-Li alloys by coupling CALPHAD and cellular automata model

Calculation of Phase Diagrams and Solidification Paths of Al-rich Al−Li−Cu Alloys

Numerical Simulation on Fluid Flow, Heat and Mass Transfer in Solidification of Fe-C Alloys

Resummation in Hot Field Theories

Constitutive Behavior Predictions of Mushy Zone During Solidification by Phase Field Model and Coupled Eulerian–Lagrangian Method

Thermodynamic Descriptions of the Quaternary Mg–Al–Zn–Sn System and Their Experimental Validation

Thermophysical properties in the Al-Cu-Ag system: A combined CALPHAD and first-principles study

Quantitative Phase-Field Modeling of Rapid Alloy Solidification