Abstract:Studies were carried out systematically on a series of Al-8.5 wt pct Zn- x Mg- y Cu alloys ( x is about 1.5, 2.0, and 2.5 wt pct, and y is about 1.5, 2.0, 2.5, and 2.9 wt pct). The effects of alloying elements Mg and Cu on the microstructures of as-cast and homogenized alloys were investigated using the computational/experimental approach. It shows that Mg(Zn,Al,Cu) 2 ( σ ) phase can exist in all the as-cast alloys without any observable Mg 32 (Al,Zn) 49 /Al 2 Mg 3 Zn 3 ( T ) or Al 2 CuMg ( S ) phase, whereas Al 2 Cu ( θ ) phase is prone to exist in the alloys with low Mg and high Cu contents. Thermodynamic calculation shows that the real solidification paths of the designed alloys fall in between the Scheil and the equilibrium conditions, and close to the former. After the long-time homogenization [733 K (460 °C)/168 hours] and the two-step homogenization [733 K (460 °C)/24 hours + 748 K (475 °C)/24 hours], the phase components of the designed alloys are generally consistent with the calculated phase diagrams. At 733 K (460 °C), the phase components in the thermodynamic equilibrium state are greatly influenced by Mg content, and the alloys with low Mg content are more likely to be in single-Al phase field even if the alloys contain high Cu content. At 748 K (475 °C), the dissolution of the second phases is more effective, and the phase components in the thermodynamic equilibrium state are dominated primarily by (Mg + Cu) content, except the alloys with (Mg + Cu) ≳ 4.35 wt pct, all designed alloys are in single-Al phase field.

Calculation of Phase Diagrams and Solidification Paths of Al-rich Al−Li−Cu Alloys

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Experimental determination of the phase equilibria of aluminum-rich Al−Li−Cu alloys

Solidification Curves of AlCu, AlMg and AlCuMg Alloys

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Thermodynamic calculation of high zinc-containing Al-Zn-Mg-Cu alloy

Thermodynamic description of metastable fcc/liquid phase equilibria and solidification kinetics in Al-Cu alloys

Phase-Field Simulation of Non-Isothermal Dendritic Growth of Binary Alloy

Solidification Paths and Phase Components at High Temperatures of High-Zn Al-Zn-Mg-Cu Alloys with Different Mg and Cu Contents

Phase Equilibria of Sn–Sb–Cu System

Thermodynamic description and simulation of solidification microstructures in the Cu–Mg–Zn system

Zone Partitioning Sequential Calculation Method for Three-Dimensional Phase-Field Material Simulation During Directional Solidification

Phase-field model of isothermal solidification in multicomponent alloys for multiple grains

Phase Equilibria of the Al-Li Binary System

Phase-Field Model of Isothermal Solidification of Binary Alloy with Multiple Grains

Development and Applications of a Thermodynamic Database for Multicomponent Cu Alloys

Prediction of the Al-rich part of the Al-Cu phase diagram using cluster expansion and statistical mechanics

Solidification Simulation Using Scheil Model in Multicomponent Systems

Thermodynamic Description of Multi-Component Multi-Phase Alloys and Its Application to the Solidification Process

Phase-field Simulation of Effect of Phase-field Parameters on Solidification Process of Multicomponent Alloys

Phase-Field Simulation for Non-isothermal Solidification of Al-Cu Binary Alloy