Abstract:16 Mg–Al–Zn–Bi quaternary alloys were utilized to measure the phase equilibria and transformation temperatures in the Mg-rich Mg–Al–Zn–Bi quaternary system by means of the X-ray diffraction, electron probe micro-analysis and differential scanning calorimetry techniques. The isothermal section at 400 °C and three vertical sections along Mg–8 wt%Al–0.75 wt%Zn–xBi, Mg–3.4 wt%Al–0.5 wt%Zn–xBi and Mg–6.9 wt%Al–2.3 wt%Zn–xBi in the Mg–Al–Zn–Bi quaternary system were constructed. Based on the literature data, the ternary Mg–Al–Bi and Mg–Bi–Zn systems were re-assessed using the CALculaiton of PHAse Diagram (CALPHAD) approach. The calculated phase equilibria agree well with the measured data. By directly extrapolating the constituent sub-ternary systems, the thermodynamic database for the Mg–Al–Zn–Bi quaternary system was developed. The remarkable consistency between the predicted phase equilibria and the presently measured data in Mg–Al–Zn–Bi quaternary system further demonstrated the accuracy and reliability of the established thermodynamic database. After that, by using the newly developed thermodynamic database, the growth restrict factors and the solidification curves in Bi-containing AZ series magnesium alloys were calculated and analyzed. It was confirmed that the grain size of AZ alloys can be refined with the addition of Bi, and the component Al had larger grain refinement effect than Bi. Besides, the amount of Bi had also noticeable effect on the solidification sequence of the AZ alloys.

Thermodynamic description and simulation of solidification microstructures in the Cu–Mg–Zn system

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Thermodynamic Descriptions of the Quaternary Mg–Al–Zn–Sn System and Their Experimental Validation

Solidified microstructure and Phase equilibria of the Cu–Cr–X (X=Mg, Y) ternary systems

Thermodynamic descriptions of quaternary Mg–Al–Zn–Bi system supported by experiments and their application in descriptions of solidification behavior in Bi-additional AZ casting alloys

Thermodynamic study of the Ca-Cu-Zn ternary system with key experimental measurements

Phase Equilibria, Thermodynamics and Solidified Microstructure in the Copper–Zirconium–Yttrium System

Phase equilibria thermodynamics and solidified microstructure in the Ag-Cr-Zr system

Thermodynamic calculation of high zinc-containing Al-Zn-Mg-Cu alloy

Thermodynamic Descriptions of the Cu–Zn System

Liquidus Projection and Thermodynamic Modeling of Sn–Zn–Cu Ternary System

Thermodynamic Description of Multi-Component Multi-Phase Alloys and Its Application to the Solidification Process

Development and Applications of a Thermodynamic Database for Multicomponent Cu Alloys

Experimental Investigation and Thermodynamic Assessment of the Mo–Ni–Zr Ternary System

Experimental investigation and simulation assessment on fluidity and hot tearing of Mg-Zn-Cu system alloys

Thermodynamic Simulation Calculations of Phase Transformations in Low-Aluminum Zn-Al-Mg Coatings

Solidification Paths and Phase Components at High Temperatures of High-Zn Al-Zn-Mg-Cu Alloys with Different Mg and Cu Contents

Thermophysical properties in the Al-Cu-Ag system: A combined CALPHAD and first-principles study

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Thermodynamic Calculation of Phase Equilibria in the C-Mo-Zr System

Phase-field Simulation of Solidification in Multicomponent Alloys Coupled with Thermodynamic and Diffusion Mobility Databases