Abstract:Quinary phase-field model was extended and constructed, and the diffusion-controlled phase decomposition and morphology in thermal aging Fe–Cu–Mn–Ni–Al quinary system coupled with CALPHAD thermodynamic databases were successfully studied. The effects of Manganese composition on the morphology, volume fraction, number density, particles size and growth and coarsening of Cu-rich precipitates were investigated systematically. The simulation results showed that Cu-rich α phase was firstly formed, and the Ni, Al and Mn atoms were partitioned to the Cu-rich phase, leading to the formation of a Ni–Al–Mn-rich intermetallic ring/Cu-rich core precipitate morphology and final conversion of Cu-rich phase to Cu-rich γ phase. The curves of volume fraction and free energy variation with simulation time indicated that Mn element can promote nucleation driving force to overcome the nucleation barrier in initial stage and can also accelerate the precipitation of Cu-rich phase and promote the growth and coarsening processes. Through the analysis of number density (ND) and average particle size (APS), we found that the values of ND and APS of Cu-rich particles increase with the rising of Mn content, which indicates that the higher Mn content will boost the nucleation and growth rate. Moreover, the time exponent at the later precipitation was 0.41, 0.42 and 0.37, respectively, which had deviations with the 0.33 of the LSW’s value, and the growth and coarsening of Cu-rich precipitates were under the mixed mechanisms of Ostwald ripening and coalescence coarsening of neighboring precipitates. These results provided useful information for the preparation of multi-component alloyed steel with excellent mechanical properties to some extent.

Solidified microstructure and Phase equilibria of the Cu–Cr–X (X=Mg, Y) ternary systems

Phase Equilibria, Thermodynamics and Solidified Microstructure in the Copper–Zirconium–Yttrium System

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Thermodynamic description and simulation of solidification microstructures in the Cu–Mg–Zn system

Phase equilibria thermodynamics and solidified microstructure in the Ag-Cr-Zr system

Solidification Paths and Phase Components at High Temperatures of High-Zn Al-Zn-Mg-Cu Alloys with Different Mg and Cu Contents

Microstructure and Properties of Cold Drawing Cu-2.5% Fe-0.2% Cr and Cu-6% Fe Alloys

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Theoretical Investigation of Cu Influence on the Stability Characteristics of T-phase in Crossover Alloys

Development and Applications of a Thermodynamic Database for Multicomponent Cu Alloys

Thermodynamic properties and primary phase structures of ternary Cu90−xSnxSb10 alloys investigated by differential scanning calorimetry and laser flash method

Bulk Mg-Cu-Y-Al Alloys in the Amorphous, Supercooled Liquid and Crystalline States

Microstructure and properties of high strength, high conductivity Cu-2.5Fe-0.3Cr-0.3Mg-0.2Si-0.1Ca-0.1Zr alloy treated by multi-stage thermomechanical treatment

Formation of high strength Mg–Cu–Zn–Y alloys

Phase Equilibria of the Sn–Zn–Cu Ternary System

Microstructure and thermophysical properties of Mg-2Zn-xCu alloys

Phase-field modeling of microstructure evolution of Cu-rich phase in Fe–Cu–Mn–Ni–Al quinary system coupled with thermodynamic databases

Design of Cu–Cr Alloys with High Strength and High Ductility Based on First-Principles Calculations

Electronic, Magnetic, and Mechanical Properties of YX′CrZ (X′ = Fe, Co, Ni; Z = Si, Ge, Sn) Quaternary Heusler Alloys

Thermodynamic descriptions of quaternary Mg–Al–Zn–Bi system supported by experiments and their application in descriptions of solidification behavior in Bi-additional AZ casting alloys

The microstructures and mechanical properties of a highly alloyed Al-Zn-Mg-Cu alloy: The role of Cu concentration