Abstract:A model for predicting the microsegregation of ternary alloys was developed via extending a previously proposed unified microsegregation model for binary alloys.The present multicomponent /multiphase model retains the advanced features of the previous binary microsegregation model,in which the unified microscale parameterΦtakes a general function form to account for more possible influential factors,including the partition coefficient,solid fraction,solid diffusion coefficient, dendrite geometrical morphologies and solidification rate,etc. The algorithms for calculating the solidification paths of ternary isomorphous and eutectic alloys were proposed,which closely couples with a commercial software package/database of Thermo-Calc via its TQ6-interface in order to directly access to thermodynamic data needed in the multicomponent /multiphase solidification path computations.In the solidification of primary phase and three phases eutectic,solid fraction f_S was selected to be a control variable when solving the equations of the microsegregation models,while in the solidification of two phases eutectic,temperature was selected to be a control variable as the relationship between the concentrations of solutes B and C was unknown.In each calculation iterative step,the names and number of the equilibrium phases were obtained from Thermo-Calc,and then saved and compared with the calculation results of the previous step.As the names and number of the equilibrium phases in each solidification stage of ternary eutectic alloys are different,the three solidification types were determined by comparing with the results in the computation process. The availability and reliability of the proposed multicomponent/multiphase model and algorithms were demonstrated by sample computations for the solidification paths of Fe-40V-40Cr,Al-4.5Cu-1Si, Al-10Cu-2.5Mg and Al-1.49Si-0.64Mg(mass fraction,%) alloys under different solidification/cooling rates,and by comparisons with the experimental results of quantitative measurements of corresponding solidification microstructures.

Research on the Solid-Liquid Interface Stability of Multicomponent Alloys with CALPHAD Method

Prediction of Solid-Liquid Interface Stability by Coupling M-S Model with CALPHAD Method

Prediction of Solid-Liquid Interface Stability and Dendritic Growth in Multi-Component Alloys with Calphad Method

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Thermodynamic Description of Multi-Component Multi-Phase Alloys and Its Application to the Solidification Process

Examination of dendritic growth and microsegregation during solidification of Al–Li binary alloy using the phase-field simulation coupling CALPHAD data

Phase-field Study for the Influence of Solute Interactions on Solidification Process in Multicomponent Alloys

THERMO-CALC LINKED COMPUTATIONS OF SOLIDIFICATION PATHS OF TERNARY ALLOYS USING AN EXTENDED UNIFIED MICROSEGREGATION MODEL

Simulation of Isothermal Solidification of Multi-Component Alloys with Phase-Field Method

Prediction of the High Gradient Absolute Stability of the Unidirectional Solidification Interface

Prediction of the Solidification Path of Al-6.32cu-25.13mg Alloy by A Unified Microsegregation Model Coupled with Thermo-Calc

A Cellular Automaton Technique for the Modeling of Solidification Microstructure in Multi-Component Alloys

Thermodynamic description and simulation of solidification microstructures in the Cu–Mg–Zn system

A unified analytical model for the primary solidification path in ternary alloys

CALPHAD-Type Reassessment of Cu-Si and Full Assessment of the Al-Cu-Si Systems

Thermodynamic Predictions of Mg – Al – Ca Alloy Compositions Amenable to Semi-Solid Forming

Thermo-Calc and T—fS—CL Coupling Based Method to Determine Solidification Paths of Alloys Solidified under Condition of Biot≤0.1

An Extended Morphological Stability Model for a Planar Interface Incorporating the Effect of Nonlinear Liquidus and Solidus

Predicting hydrogen microporosity in long solidification range ternary Al-Cu-Li alloys by coupling CALPHAD and cellular automata model

An interface-tracking numerical method for rapid planar solidification of binary alloys with application to microsegregation

Phase-field Simulation of Solidification in Multicomponent Alloys Coupled with Thermodynamic and Diffusion Mobility Databases