Abstract:The structural differences at various positions in the GH3625 alloy before and after magnesium treatment were statistically analyzed. In situ observation experiments were conducted at different cooling rates to examine the changes in solidification structure following magnesium treatment. A new theoretical explanation for the differential effects of magnesium treatment was proposed based on classical homogeneous nucleation theory. In practical applications, intermetallic compounds like Laves phase and metal carbides adversely affect the performance of nickel‐based superalloys. Using a high‐temperature confocal laser scanning microscope, the solidification process of as‐cast GH3625 alloy containing Mg at different cooling rates (−20, −35, and −50 °C min−1) is studied. Fitting curves of the volume fraction of the solid phase with solidification temperature before and after Mg treatment are obtained. Trends of solid phase transformation rates with solidification temperature are determined. Differential scanning calorimetry is employed to analyze and statistically evaluate the melting temperature range and enthalpy of each phase during the melting process. Experimental results demonstrate that Mg treatment significantly accelerates the alloy solidification at the cooling rates of −20 and −35 °C min−1, while reducing the area of residual liquid phase at the same solidification temperature, disrupting the Laves/NbC eutectic relationship, and regularizing NbC morphology, transitioning its distribution from aggregation to dispersion. After Mg treatment, the precipitation of the Laves phase is significantly reduced. As a result, the influence mechanism of Mg treatment on the phase transformation and microstructure of GH3625 is clarified based on homogeneous nucleation theory.

Effects of Cooling Rates on the Solidification Process of Al-Si-Mg Alloy

Dependence of Phase Selection on Cooling Rates in As-Cast Al-Si-Mg Alloys

Effect of Cooling Rate on Solidification Parameters and Microstructure of Al-7Si-0.3Mg-0.15Fe Alloy

Effect of Mg on Nucleation Process of Recrystallization in Al–Mg–Si/SiCp Composite

The Effect of Cooling Rate on the Microstructure and Mechanical Properties of Mg–Zn–Gd-based Alloys

Effects of cooling rates on precipitates in homogenized Al–Cu–Li alloy

Effects of Cooling Rate on the Solidification Process of Pure Metal Al: Molecular Dynamics Simulations Based on the MFPT Method

Effect of Cooling Rates on the Microstructure and Mechanical Property of La Modified Al7SiMg Alloys Processed by Gravity Die Casting and Semi-Solid Die Casting

Effect of cooling rate on microstructure and mechanical properties of Mg-9Gd-4Y-1Zn-1Al alloy

Solidification Behavior of Ni-based Superalloy at Different Cooling Rates

Effect of melt overheating, cooling and solidification rates on Al–16wt.%Si alloy structure

Phase-field Simulation of Effect of Phase-field Parameters on Solidification Process of Multicomponent Alloys

Effect of Microstructure on the Precipitation of β-Mg2Si during Cooling after Homogenisation of Al-Mg-Si Alloys

Effect of cooling rate and Al content on solidification characteristics of AZ magnesium alloys using cooling curve thermal analysis

Effect of Cooling Rate on Solidification Structure of Zinc-Aluminum-Magnesium Alloy

Effects of Solidification Cooling Rates on Microstructures and Physical Properties of Fe-6.5%Si Alloys

Effect of Cooling Rate on the Microstructure Evolution and Mechanical Properties of Iron-Rich Al–Si Alloy

Effects of cooling manner on Laves phase precipitation and mechanical properties of Al modified super ferritic stainless steels

In Situ Observation of Microstructure and Precipitate Phase Transformation during the Solidification of Mg‐Containing GH3625 Alloy at Different Cooling Rates

Effect of ultrasonic melt processing and cooling rate on microstructure evolution of Al–Cu–Mn–Mg–Fe–Si alloy

Effect of Cooling Rate on Oxide Inclusions During Solidification of 304 Stainless Steel