Abstract:The phase equilibrium of Mg-Cu-Ca ternary system at 350 degrees C were investigated using thirteen key samples. Scanning electron microscopy (SEM) equipped with energy-dispersive spectroscope (EDS) was employed to investigate equilibrium relationships and phase compositions in alloy samples. Powder X-ray diffraction (XRD) technique was used to analyze the crystal structures of new found phases. Two unreported ternary phases, P1 and Mg25-xCu75Cax were observed and investigated for the first time. The compound P1 has a narrow solid homogeneity ranged from about Mg25Cu35Ca40 to Mg30Cu30Ca40 (in at. %). The solid solubility limit of the compound Mg25-xCu75Cax was found to be 8.03 <= x(Ca) <= 16.67 with constant value of about 75 at. % Cu at 350 degrees C. The 2q of fourteen diffraction peaks of new phase P1 were determined to be 23.0 degrees, 35.9 degrees, 37.3 degrees, 38.9 degrees, 42 degrees, 44 degrees, 47 degrees, 52.5 degrees, 54 degrees, 56.7 degrees, 62.3 degrees, 66.8 degrees, 68.2 degrees and 75.4 degrees. The 2q of ten diffraction peaks of the new compound Mg25-xCu75Cax were confirmed to be 20.5 degrees, 21.2 degrees, 34.7 degrees, 35.7 degrees, 42.3 degrees, 43.3 degrees, 44.8 degrees, 47.3 degrees, 50.5 degrees and 74.5 degrees. The maximum solid solubility of Ca in the terminal compound MgCu2 was found to be 8.83 at. % at 350 degrees C. Ternary maximum solid solubility of binary terminal compounds Mg2Ca, Mg2Cu, Cu5Ca and CuCa were less than 2 at. %. In addition, eight three-phase equilibrium relationships were determined in the present work. (C) 2019 Elsevier B.V. All rights reserved.

Experimental Description of the Al-Cu Binary Phase Diagram

Thermodynamic Descriptions of the Cu–Zn System

Thermodynamic description of metastable fcc/liquid phase equilibria and solidification kinetics in Al-Cu alloys

Theoretical Investigation of Cu Influence on the Stability Characteristics of T-phase in Crossover Alloys

Prediction of the Al-rich part of the Al-Cu phase diagram using cluster expansion and statistical mechanics

First-principles Investigation of the Structural, Mechanical and Thermodynamic Properties of Al2Cu Phase under Various Pressure and Temperature Conditions

Phase equilibria of the cu-in system I: Experimental investigation

Experimental determination of the phase equilibria of aluminum-rich Al−Li−Cu alloys

Phase Equilibria of the Cu-in System II: Thermodynamic Assessment and Calculation of Phase Diagram

Experimental Determination of the Phase Equilibrium in the Mg–Cu–Ca Ternary System at 350 °C

First-principles calculations, experimental study, and thermodynamic modeling of the Al-Co-Cr system

Phase Equilibria of the Sn–Zn–Cu Ternary System

Thermodynamic study of the Ca-Cu-Zn ternary system with key experimental measurements

Phase Equilibria in the Al–Co–Cr–Fe–Ni High Entropy Alloy System: Thermodynamic Description and Experimental Study

Phase Equilibria of Sn-Co-Cu Ternary System

Solidification Paths and Phase Components at High Temperatures of High-Zn Al-Zn-Mg-Cu Alloys with Different Mg and Cu Contents

Critical assessment of Co-Cu phase diagram from first-principles calculations

Calculation of Phase Diagrams and Solidification Paths of Al-rich Al−Li−Cu Alloys

Thermodynamic calculation of high zinc-containing Al-Zn-Mg-Cu alloy

Phase Equilibria of the Cu-Se-Te Ternary System

Ag-Cu-Te Phase Equilibria Isothermal Sections at 600 °C and 400 °C