Abstract:K-carrageenan and various concentrations of zinc nitrate hexahydrate have been combined to develop a zinc ion-conducting biopolymer electrolyte membrane using the solution casting method. To examine the amorphous nature of the samples, X-ray diffraction (XRD) study has been used. The maximum amorphous nature is observed for 1 g K-carrageenan with 1.1 M. wt % of zinc nitrate hexahydrate biopolymer membrane. Fourier transform infrared spectroscopy (FTIR) investigations have shown that the complexation occurs between the K-carrageenan with zinc nitrate hexahydrate. Surface morphology of Pure K-carrageenan, 1 g K-carrageenan with 1.1 M.wt % of zinc nitrate hexahydrate and 1 g K-carrageenan with 1.2 M.wt % of zinc nitrate hexahydrate have been studied by SEM analysis. Pure K-carrageenan membrane (SEM) has uniform surface with uniform small pores. 1 g K-carrageenan with 1.1 M.wt % of zinc nitrate hexahydrate membrane (SEM) shows rectangular rod-shaped nature along with pores of moderate diameter. 1 g K-carrageenan with 1.2 M.wt % of zinc nitrate hexahydrate membrane SEM shows rectangular rod-shaped nature along with pores of moderate diameter and aggregates. For the zinc-doped biopolymer membrane samples, the differential scanning calorimetry (DSC) is used to determine the glass transition temperature. Pure K-carrageenan has got T g value at 37.04 °C. When the salt concentration is increased upto 0.9 M.wt % of the T g value increases. When the salt concentration is further increased upto 1.1 M.wt % of the T g value decreases. Highest zinc ion conducting membrane has got a T g value of 75.95 °C. According to electrochemical impedance spectroscopy (EIS), the 1 g K-carrageenan with 1.1 M. wt % of zinc nitrate hexahydrate membrane has highest zinc ion conductivity of 2.9 × 10 −3 S cm −1 . According to the linear sweep voltammetry (LSV) investigation, the 1 g K-carrageenan with 1.1 M. wt % of zinc nitrate hexahydrate membrane has shown a wide electrochemical stability window of 2.75 V. The Evans polarization method determined that Zn 2+ ion has a transference number of 0.42. The cyclic stability of highest conducting biopolymer membrane (Zn 2+ ion) is studied by Cyclic Voltammetry. The electrolyte used in the construction of the primary zinc battery is 1 g K-carrageenan with 1.1 M. wt % of zinc nitrate hexahydrate having highest zinc ion conductivity. For this built-in battery, the OCV (Open Circuit Voltage) is found to be 1.43 V.

Development of sodium-ion conducting biopolymer electrolyte membrane based on Agar-Agar with sodium perchlorate (NaClO4) using ethylene carbonate (EC) as a plasticizer for primary Na-ion battery

Electrical and Structural Characterization of PVA/PEG Polymer Blend Electrolyte Films Doped with NaClO 4

Performance of solid-state Li-ion conducting battery using biopolymer electrolyte based on agar–agar/lithium chloride

A physicochemical elucidation of sodium perchlorate incorporated alginate biopolymer: toward all-solid-state sodium-ion battery

Poly(olefin)-Based Anion Exchange Membranes Prepared Using Ziegler–Natta Polymerization

Development and characterization of biopolymer electrolyte based on gellan gum for the fabrication of solid-state sodium-ion battery

Performance study of sodium alginate (SA) with lithium chloride (LiCl)-based solid-state membrane as an electrolyte in electrochemical device application

Characterization of biodegradable solid polymer electrolyte system based on agar-NH4Br and its comparison with NH4I

Investigations on Na-ion conducting electrolyte based on sodium alginate biopolymer for all-solid-state sodium-ion batteries

Investigation on tamarind seed polysaccharide biopolymer electrolyte doped with sodium nitrite and EC plasticizer for primary sodium battery

Ion transport properties and performance of gellan gum based composite polymer membrane electrolytes in proton battery and PEMFC applications

Preparation of pectin biopolymer electrolyte for zinc-ion battery application

Preparation of eco-friendly biopolymer electrolyte, K-carrageenan with zinc nitrate hexahydrate salt, for application in electrochemical devices

Influence of sodium salts on the phase and gelation behaviour of T1107 to be used as proposed polymer gel electrolyte

Study of proton-conducting polymer electrolyte based on K-carrageenan and NH4SCN for electrochemical devices

Ionic Conductive Membrane Suitable for Sodium Metal Batteries

A sodium ion conducting gel polymer electrolyte with counterbalance between 1-ethyl-3-methylimidazolium tetrafluoroborate and tetra ethylene glycol dimethyl ether for electrochemical applications

A Porous Gel-Type Composite Membrane Reinforced by Nonwoven: Promising Polymer Electrolyte with High Performance for Sodium Ion Batteries

Compositional dependence of electrochemical properties in biopolymer blend-based solid electrolytes doped with sodium perchlorate for EDLC applications

Nafion Membranes As Electrolyte and Separator for Sodium-Ion Battery

Electrolytic Performance of Sodium Alginate-Poly Vinyl Alcohol Matrix with Ammonium Bromide for Proton Conduction: Applications in Electrochemical Systems