Abstract:The insufficient ionic conductivity of oxide-based solid electrolytes and the large interfacial resistance between the cathode material and the solid electrolyte severely limit the performance of room-temperature all-solid-state sodium rechargeable batteries. A NASICON solid electrolyte Na3.4Zr1.9Zn0.1Si2.2P0.8O12, with superior room-temperature conductivity of 5.27 × 10–3 S cm–1, is achieved by simultaneous substitution of Zr4+ by aliovalent Zn2+ and P5+ by Si4+ in Na3Zr2Si2PO12. The bulk conductivity and grain boundary conductivity of Na3.4Zr1.9Zn0.1Si2.2P0.8O12 are nearly 20 times and almost 50 times greater than those of pristine Na3Zr2Si2PO12, respectively. The FeS2||polydopamine-Na3.4Zr1.9Zn0.1Si2.2P0.8O12||Na all-solid-state sodium batteries, with a polydopamine modification thin layer between the solid electrolyte and the cathode, maintain a high reversible capacity of 236.5 mAh g–1 at a 0.1 C rate for 100 cycles and a capacity of 133.1 mAh g–1 at 0.5 C for 300 cycles, demonstrating high performance for all-solid-state sodium batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.0c01432?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.0c01432</a>.Experimental section; XRD, NPD, SEM, and EIS measurements for different solid electrolyte materials; STEM-EDS and DC polarization measurement for Zn0.1 sample; EDS measurement for Zn0.1 sample before and after contact with sodium; unit cell parameters of different solid electrolyte materials; structural parameters of different solid electrolyte materials; BVEL analysis and the comparison of bottleneck sizes; conductivities, activation energies, and relative densities of different solid electrolyte materials; FTIR measurement for Zn0.1 pellet with and without PDA layer; charge–discharge curves of FeS2||Zn0.1||Na all-solid-state battery; comparison of conductivities and battery performances reported in the literature and in this work; cross-sectional images of the cathode/electrolyte interface before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.0c01432/suppl_file/nz0c01432_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A physicochemical elucidation of sodium perchlorate incorporated alginate biopolymer: toward all-solid-state sodium-ion battery

Investigations on Na-ion conducting electrolyte based on sodium alginate biopolymer for all-solid-state sodium-ion batteries

Performance study of sodium alginate (SA) with lithium chloride (LiCl)-based solid-state membrane as an electrolyte in electrochemical device application

Development and characterization of biopolymer electrolyte based on gellan gum for the fabrication of solid-state sodium-ion battery

Sustainable Solid-State Sodium-Ion Batteries Featuring Ferroelectric Electrolytes

Sodium alginate incorporated with magnesium nitrate as a novel solid biopolymer electrolyte for magnesium-ion batteries

Development of sodium-ion conducting biopolymer electrolyte membrane based on Agar-Agar with sodium perchlorate (NaClO4) using ethylene carbonate (EC) as a plasticizer for primary Na-ion battery

Performance of solid-state Li-ion conducting battery using biopolymer electrolyte based on agar–agar/lithium chloride

Robust Polymer Electrolyte with Enhanced Ionic Conductivity Realized by the Incorporation of Electrospun MgAl 2 O 4 Nanofibers

Promoted ion conductivity of sodium salt–poly(ethylene oxide) polymer electrolyte induced by adding conductive beta-alumina and application in all-solid-state sodium batteries

Ionic Liquid-Laden Zn-MOF-74-Based Solid-State Electrolyte for Sodium Batteries

A Medium-Temperature All-Solid-State Sodium Battery Utilizing Sodium-Beta Alumina and a Polymeric Composite Positive Electrode

LaCl3-based sodium halide solid electrolytes with high ionic conductivity for all-solid-state batteries

Plastic Crystal Polymer Electrolytes Containing Boron Based Anion Acceptors for Room Temperature All-Solid-state Sodium-Ion Batteries

Sandwiched composite electrolyte with excellent interfacial contact for high-performance solid-state sodium-ion batteries

Ultrastable All-Solid-State Sodium Rechargeable Batteries

NASICON-structured Na3.1Zr1.95Mg0.05Si2PO12 solid electrolyte for solid-state sodium batteries

Ionic Conductive Membrane Suitable for Sodium Metal Batteries

Ultrathin Salt-Free Polymer-in-ceramic Electrolyte for Solid-State Sodium Batteries

Synthesis and Thermal Evaporation Deposition of Sodium Oxychloride Solid-State Electrolyte for Sodium-Ion Batteries

A Na-rich Fluorinated Sulfate Anti-Perovskite with Dual Doping As Solid Electrolyte for Na Metal Solid State Batteries