Abstract:Solid polymer electrolytes (SPEs) were investigated for several decades due to their good compatibility with electrodes. However, meeting the essential requirements for solid polymer electrolytes, including enhanced ionic conductivity, superior solubility with conductive lithium salts, and robust interface stability when in contact with a Li anode, remains a formidable challenge. In our work, we found that transition metal carbides (NiNbCeC) over mesoporous silica (SBA-15) can be filled into the Polyethylene Oxide (PEO) matrix to form composite solid electrolytes which can greatly improve the ionic conductivity of PEO. We investigate a series of transition metal carbides with varying mass ratios of Cerium (5%, 10%, and 20%) to fabricate All-Solid-State Li-S batteries (ASSLi-S). Our results demonstrate that different mass ratios of Cerium play a pivotal role in enhancing the ionic conductivity of the composite solid electrolytes, reducing impedance levels from 9150 O (20% Ce) to 4000 O (5% Ce) to 1730 O (10% Ce). At room temperature, the high initial specific capacity at 1C and reversible specific capacity after 100 cycles are 525 and 363 mAh/g, 605 and 403 mAh/g, 246.3 mAh/g and 63.28 mAh/g for 5% Ce, 10%, and 20%, respectively. Furthermore, long-term cycling tests of ASSLi-S cells at 0.5C reveal promising performance, with the cell containing 10% Ce solid electrolytes delivering an initial specific capacity of 1165.7 mAh/g and maintaining 335 mAh/g after 200 cycles. This represents a significant breakthrough, demonstrating that PEO-based solid electrolytes can achieve impressive electrochemical results at room temperature. SEM characterization was employed to assess the volume change in the solid electrolyte layer and elemental distribution of solid electrolyte materials through cross-sectional analysis. This analysis revealed that the failure modes of solid-state Li-S cells can also be attributed to the migration of sulfur elements from the cathode to the solid electrolyte layer during the cycling process. XRD was utilized to study the crystallinity of composite solid electrolytes. This study represents a significant stride in the progress of high-performance solid polymer electrolytes for All-Solid-State Li-S batteries, shedding light on the failure modes of such batteries. It underscores the potential of composites based on transition metal carbides in addressing crucial challenges for their practical implementation in Solid-State Lithium-Sulfur Batteries.

Robust Polymer Electrolyte with Enhanced Ionic Conductivity Realized by the Incorporation of Electrospun MgAl 2 O 4 Nanofibers

High‐Capacity All‐Solid‐State Sodium Metal Battery with Hybrid Polymer Electrolytes

Hot‐Pressing Enhances Mechanical Strength of PEO Solid Polymer Electrolyte for All‐Solid‐State Sodium Metal Batteries

A Novel Super‐Toughness and Self‐Healing Solid Polymer Electrolyte for Solid Sodium Metal Batteries

Rational design of a topological polymeric solid electrolyte for high-performance all-solid-state alkali metal batteries

Highly Conductive Poly(ethylene oxide)-Based Composite Polymer Electrolyte for Sodium Battery Applications

Enhanced electrochemical performance of all-solid-state sodium-sulfur batteries by PEO-NaCF3SO3-MIL-53(Al) solid electrolyte

A Hetero‐Layered, Mechanically Reinforced, Ultra‐Lightweight Composite Polymer Electrolyte for Wide‐Temperature‐Range, Solid‐State Sodium Batteries

Promoted ion conductivity of sodium salt–poly(ethylene oxide) polymer electrolyte induced by adding conductive beta-alumina and application in all-solid-state sodium batteries

Novel PEO-based composite solid electrolytes for all-solid-state Li-S battery

Zwitterionic Cellulose‐based Polymer Electrolyte Enabled by Aqueous Solution Casting for High‐performance Solid‐state Batteries

High Ionic Conductivity of Composite Solid Polymer Electrolyte Via in Situ Synthesis of Monodispersed SiO2 Nanospheres in Poly(ethylene Oxide).

A Hybrid Polymer/oxide/ionic-Liquid Solid Electrolyte for Na-metal Batteries

Polyanion‐Induced Single Na‐Ion Polymer Electrolytes for Ultra‐Stable Sodium Metal Batteries

3D core-shell nanofibers framework and functional ceramic nanoparticles synergistically reinforced composite polymer electrolytes for high-performance all-solid-state lithium metal battery

Nb/Al co‐doped Li7La3Zr2O12 Composite Solid Electrolyte for High‐Performance All‐Solid‐State Batteries

Perovskite CsPbI 3 Nanowire-Reinforced PEO Electrolytes Toward High-Rate All-Solid-State Lithium–Metal Battery

Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li2O2

Electronically Conductive Polymer Enhanced Solid-State Polymer Electrolytes for All-Solid-State Lithium Batteries

Achieving Ultra‐Stable All‐Solid‐State Sodium Metal Batteries with Anion‐Trapping 3D Fiber Network Enhanced Polymer Electrolyte

Highly Safe, Ultra‐Thin MOF‐Based Solid Polymer Electrolytes for Superior All‐Solid‐State Lithium‐Metal Battery Performance