Abstract:Polymer solid-state electrolytes (SSEs) usually suffer from low ionic conductivity and interface instability between the electrolyte and lithium metal. Herein, a strategy using perovskite CsPbI3 nanowires (CsPbI3–NWs) to reinforce the poly(ethylene oxide) (PEO) electrolyte (PLN) has been developed to build a high-rate all-solid-state lithium–metal battery (ASSLMB). The principle is that the addition of CsPbI3–NWs significantly reduces the crystallinity of PEO and promotes the dissociation of Li+-ion, therefore leading to a large Li+-ion migration number (t Li +) (0.61) and excellent ionic conductivity (1.66 × 10–4 S cm–1) at 30 °C. Meanwhile, the lithium dendrite growth is effectively suppressed and a stable SEI is formed in the Li|PLN|Li ASSLMB. Moreover, the Li|PLN|LiFePO4 ASSLMBs possess remarkable rate capability (∼94.3 mAh g–1 under 5C), high Coulombic efficiency (CE) (∼99.7% on average), and cycling stability (8.6% capacity loss for 200 cycles at 0.8C) at 90 °C. This work reveals that CsPbI3–NW-reinforced PEO-based SSE is a good candidate to develop high-performance ASSLMBs by increasing the ionic conducting ability and promoting the formation of a stable electrochemical interface.

What problem does this paper attempt to address?

The paper attempts to address the issue of how to improve the ionic conductivity and interfacial stability of polymer solid-state electrolytes (SSE) in all-solid-state lithium metal batteries (ASSLMB). Specifically, the authors propose a method to enhance poly(ethylene oxide) (PEO) electrolytes using perovskite CsPbI₃ nanowires (CsPbI₃−NWs) to construct high-rate all-solid-state lithium metal batteries. ### Main Issues and Solutions 1. **Low Ionic Conductivity**: - **Problem**: Traditional PEO-based solid-state electrolytes have very low ionic conductivity at room temperature (10⁻⁸−10⁻⁷ S cm⁻¹), which limits their performance in practical applications. - **Solution**: By adding CsPbI₃−NWs, the crystallinity of PEO is significantly reduced, and the dissociation of Li⁺ ions is promoted, thereby increasing the ionic conductivity (1.66 × 10⁻⁴ S cm⁻¹). 2. **Interfacial Instability**: - **Problem**: The interface between PEO-based electrolytes and lithium metal is unstable, easily leading to lithium dendrite growth, which affects the cycling stability and safety of the battery. - **Solution**: The addition of CsPbI₃−NWs not only improves the mechanical strength of the electrolyte but also forms a stable solid electrolyte interface (SEI), effectively inhibiting the growth of lithium dendrites. 3. **High-Rate Performance**: - **Problem**: Traditional PEO-based electrolytes perform poorly during high-rate charge and discharge. - **Solution**: By enhancing the migration ability of Li⁺ ions and reducing interfacial resistance, the battery exhibits excellent performance at high rates (e.g., at a 5C rate, the capacity is about 94.3 mAh g⁻¹). ### Experimental Methods and Results - **Material Preparation**: - CsPbI₃−NWs were prepared by a hot-injection method. - CsPbI₃−NWs, PEO, and LiTFSI were mixed to prepare PLN electrolyte films. - **Characterization Methods**: - The materials were characterized using techniques such as X-ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), Raman spectroscopy, and nuclear magnetic resonance (NMR). - The electrochemical performance of the electrolyte was evaluated using electrochemical impedance spectroscopy (EIS), polarization tests, and galvanostatic intermittent titration technique (GITT). - **Experimental Results**: - The ionic conductivity of the PLN electrolyte at room temperature is 1.66 × 10⁻⁴ S cm⁻¹, much higher than that of pure PEO electrolyte. - The Li⁺ ion transference number (tLi⁺) reaches 0.61, indicating a significant improvement in Li⁺ ion transport efficiency. - At a high rate (5C), the battery capacity remains around 94.3 mAh g⁻¹, with an average coulombic efficiency (CE) of 99.7%. - After 200 cycles, the capacity loss is only 8.6%, demonstrating excellent cycling stability. ### Conclusion By introducing CsPbI₃−NWs, the deficiencies of PEO-based solid-state electrolytes in terms of ionic conductivity and interfacial stability are successfully addressed, significantly enhancing the high-rate performance and cycling stability of all-solid-state lithium metal batteries. This research provides new insights for the development of high-performance all-solid-state lithium metal batteries.

Perovskite CsPbI 3 Nanowire-Reinforced PEO Electrolytes Toward High-Rate All-Solid-State Lithium–Metal Battery

Fluorinated boron nitride nanosheet enhanced ultrathin and conductive polymer electrolyte for high‐rate solid‐state lithium metal batteries

High Electrochemical Stability of a 3D Cross-Linked Network PEO@nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries

3D core-shell nanofibers framework and functional ceramic nanoparticles synergistically reinforced composite polymer electrolytes for high-performance all-solid-state lithium metal battery

Fluorinated carbon nitride with hierarchical porous structure ameliorating PEO for high-voltage, high-rate solid lithium metal batteries

SnF2-Catalyzed Lithiophilic-Lithiophobic Gradient Interface for High-Rate PEO-Based All-Solid-State Batteries

Nanoporous Adsorption Effect on Alteration of the Li + Diffusion Pathway by a Highly Ordered Porous Electrolyte Additive for High-Rate All-Solid-State Lithium Metal Batteries.

Composite Solid Electrolyte with Continuous and Fast Organic-Inorganic Ion Transport Highways Created by 3D Crimped Nanofibers@functional Ceramic Nanowires

Synergistic effect of Ti3C2Tx MXene/PAN nanofiber and LLZTO particles on high-performance PEO-based solid electrolyte for lithium metal battery

Three–dimensional fiber network reinforced polymer electrolyte for dendrite–free all–solid–state lithium metal batteries

Solid-State Plastic Crystal Electrolytes: Effective Protection Interlayers For Sulfide-Based All-Solid-State Lithium Metal Batteries

3D nanofiber framework based on polyacrylonitrile and siloxane-modified Li6.4La3Zr1.4Ta0.6O12 reinforced poly (ethylene oxide)-based composite solid electrolyte for lithium batteries

Tuning Ion/Electron Conducting Properties at Electrified Interfaces for Practical All‐Solid‐State Li–Metal Batteries

Low Resistance-Integrated All-Solid-State Battery Achieved By Li7la3zr2o12 Nanowire Upgrading Polyethylene Oxide (Peo) Composite Electrolyte And Peo Cathode Binder

Build a High‐Performance All‐Solid‐State Lithium Battery through Introducing Competitive Coordination Induction Effect in Polymer‐Based Electrolyte

Constructing robust cathode/Li interfaces and intensifying ion transport kinetics for PEO-based solid-state lithium-sulfur batteries

Mg2B2O5 Nanowire Enabled Multifunctional Solid-State Electrolytes with High Ionic Conductivity, Excellent Mechanical Properties, and Flame-Retardant Performance

A composite solid electrolyte with a framework of vertically aligned perovskite for all-solid-state Li-metal batteries

Janus nanofibers with multiple Li+ transport channels and outstanding thermal stability for all-solid-state composite polymer electrolytes

Ultrathin, Flexible Polymer Electrolyte for Cost‐Effective Fabrication of All‐Solid‐State Lithium Metal Batteries

Three-dimensional Polyimide Nanofiber Framework Reinforced Polymer Electrolyte for All-Solid-state Lithium Metal Battery