Abstract:The insufficient ionic conductivity of oxide-based solid electrolytes and the large interfacial resistance between the cathode material and the solid electrolyte severely limit the performance of room-temperature all-solid-state sodium rechargeable batteries. A NASICON solid electrolyte Na3.4Zr1.9Zn0.1Si2.2P0.8O12, with superior room-temperature conductivity of 5.27 × 10–3 S cm–1, is achieved by simultaneous substitution of Zr4+ by aliovalent Zn2+ and P5+ by Si4+ in Na3Zr2Si2PO12. The bulk conductivity and grain boundary conductivity of Na3.4Zr1.9Zn0.1Si2.2P0.8O12 are nearly 20 times and almost 50 times greater than those of pristine Na3Zr2Si2PO12, respectively. The FeS2||polydopamine-Na3.4Zr1.9Zn0.1Si2.2P0.8O12||Na all-solid-state sodium batteries, with a polydopamine modification thin layer between the solid electrolyte and the cathode, maintain a high reversible capacity of 236.5 mAh g–1 at a 0.1 C rate for 100 cycles and a capacity of 133.1 mAh g–1 at 0.5 C for 300 cycles, demonstrating high performance for all-solid-state sodium batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.0c01432?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.0c01432</a>.Experimental section; XRD, NPD, SEM, and EIS measurements for different solid electrolyte materials; STEM-EDS and DC polarization measurement for Zn0.1 sample; EDS measurement for Zn0.1 sample before and after contact with sodium; unit cell parameters of different solid electrolyte materials; structural parameters of different solid electrolyte materials; BVEL analysis and the comparison of bottleneck sizes; conductivities, activation energies, and relative densities of different solid electrolyte materials; FTIR measurement for Zn0.1 pellet with and without PDA layer; charge–discharge curves of FeS2||Zn0.1||Na all-solid-state battery; comparison of conductivities and battery performances reported in the literature and in this work; cross-sectional images of the cathode/electrolyte interface before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.0c01432/suppl_file/nz0c01432_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

NASICON-structured Na3.1Zr1.95Mg0.05Si2PO12 solid electrolyte for solid-state sodium batteries

Mg-doped NASICON-type electrolyte for rechargeable solid-state sodium-ion batteries

Bi2O3-Assisted Sintering of Na3Zr2Si2PO12 Electrolyte for Solid-State Sodium Metal Batteries

Si3N4-Assisted Densification Sintering of Na3Zr2Si2PO12 Ceramic Electrolyte toward Solid-State Sodium Metal Batteries

Boosting Na‐O Affinity in Na3Zr2Si2PO12 Electrolyte Promises Highly Rechargeable Solid‐State Sodium Batteries

Calcium Doped NASICON electrolyte with Graphite Coating for Stable All‐solid‐state Sodium Metal Batteries

Flexible composite solid electrolyte with 80 wt% Na<sub>3.4</sub>Zr<sub>1.9</sub>Zn<sub>0.</sub><sub>1</sub>Si<sub>2</sub ><sub>.</sub><sub>2</sub>P<sub>0</sub><sub>.</sub><sub>8</sub>O<sub>12</ sub> for solid-state sodium batteries

Thin NASICON Electrolyte to Realize High Energy Density Solid‐State Sodium Metal Battery

Homogeneous Na+ transfer dynamic at Na/Na3Zr2Si2PO12 interface for all solid-state sodium metal batteries

Ultrastable All-Solid-State Sodium Rechargeable Batteries

High‐Capacity All‐Solid‐State Sodium Metal Battery with Hybrid Polymer Electrolytes

Self-forming Na3P/Na2O Interphase on a Novel Biphasic Na3Zr2Si2PO12/Na3PO4 Solid Electrolyte for Long-Cycling Solid-State Na-metal Batteries

In Situ Forming Na─Sn Alloy/Na2S Interface Layer for Ultrastable Solid State Sodium Batteries

Aliovalent dual element co-assisted strategy to enhance ionic conductivity and stability of NASICON-type solid electrolyte for all-solid-state sodium batteries

A Self‐Forming Composite Electrolyte for Solid‐State Sodium Battery with Ultralong Cycle Life

Na superionic conductor-type LiZr2(PO4)3 as a promising solid electrolyte for use in all-solid-state Li metal batteries

Ionic Liquid-Laden Zn-MOF-74-Based Solid-State Electrolyte for Sodium Batteries

A composite electrolyte with Na3Zr2Si2PO12 microtube for solid-state sodium-metal batteries

Zirconia-free NaSICON solid electrolyte materials for sodium all-solid-state batteries

Rare Earth Oxide-Assisted Sintered NASICON Electrolyte Composed of a Phosphate Grain Boundary Phase with Low Electronic Conductivity

Na10SnSb2S12: A nanosized air-stable solid electrolyte for all-solid-state sodium batteries