Abstract:The endeavor to synthesize a Na+ halide‐based solid electrolyte with high ionic conductivity is quite challenging. Through simultaneously introducing Cr and Zr to give a cubic phase of Na3‐xCr1‐xZrxCl6, a new Na+ halide‐based solid electrolyte exhibits a high room temperature ionic conductivity of 0.1 mS cm−1 with a low migration energy barrier of ≈0.41 eV. All‐solid‐state batteries employing solid electrolytes (SEs) have received widespread attention due to their high safety. Recently, lithium halides are intensively investigated as promising SEs while their sodium counterparts are less studied. Herein, a new sodium‐ion conductor with a chemical formula of Na2.5Cr0.5Zr0.5Cl6 is reported, which exhibits high room temperature ionic conductivity of 0.1 mS cm−1 with low migration energy barrier of ≈0.41 eV. Na2.5Cr0.5Zr0.5Cl6 has a Fm‐3m structure with 41.67 mol.% of cationic vacancies owing to the occupation of Cr (8.33 mol.%) and Zr (8.33 mol.%) ions at Na sites. Supercell calculations show that the lowest columbic energy configuration has Cr/Zr/V (where V is the vacancy) clusters in the structure. Nonetheless, the clusters have mixed effects on the sodium ion conduction pathway, based on the Bond Valence Energy Landscape calculation. A global 3D Na‐ion transport percolation network can be revealed in the lowest energy supercell. Effective pathways are connected through the NaCl6 and VCl6 nodes. Besides, Raman spectroscopy and 23Na solid‐state nuclear magnetic resonance spectroscopy further prove the tunable structure of the SEs with different Cr to Zr ratios. The optimization between the concentration of Na+ and vacancies is crucial to create an improved network of Na+ diffusion channels.

LaCl3-based sodium halide solid electrolytes with high ionic conductivity for all-solid-state batteries

Novel Solid-State Electrolyte Na3La5Cl18 with High Stability and Fast Ionic Conduction.

Halide Superionic Conductors for All-Solid-State Batteries: Effects of Synthesis and Composition on Lithium-Ion Conductivity

Li<sub>3-<i>x</i> </sub>Zr<sub> <i>x</i> </sub>(Ho/Lu)<sub>1-<i>x</i> </sub>Cl<sub>6</sub> Solid Electrolytes Enable Ultrahigh-Loading Solid-State Batteries with a Prelithiated Si Anode

A Series of Ternary Metal Chloride Superionic Conductors for High‐Performance All‐Solid‐State Lithium Batteries

A LaCl3-based Lithium Superionic Conductor Compatible with Lithium Metal.

A LaCl 3 -based lithium superionic conductor compatible with lithium metal

Heterovalent Cation Substitution to Enhance the Ionic Conductivity of Halide Electrolytes

High-Conductivity Li 2 ZrCl 6 Electrolytes via an Optimized Two-Step Ball-Milling Method for All-Solid-State Lithium–Metal Batteries

Li 3– x Zr x (Ho/Lu) 1– x Cl 6 Solid Electrolytes Enable Ultrahigh-Loading Solid-State Batteries with a Prelithiated Si Anode

A stable cathode-solid electrolyte composite for high-voltage, long-cycle-life solid-state sodium-ion batteries

Superionic amorphous NaTaCl6 halide electrolyte for highly reversible all-solid-state Na-ion batteries

A Stable Cathode-Solid Electrolyte Composite for Long-Cycle-Life, High Voltage Solid-State Sodium-ion Batteries

Na2.5Cr0.5Zr0.5Cl6: A New Halide‐Based Fast Sodium‐Ion Conductor

Wet Chemistry Route to Li3InCl6: Microstructural Control Render High Ionic Conductivity and Enhanced All-Solid-State Battery Performance

Halide solid-state electrolyte achieving high ionic conductivity by engineering nanocrystals

Enabling ultrafast lithium-ion conductivity of Li2ZrCl6 by indium doping

A cost-effective, ionically conductive and compressible oxychloride solid-state electrolyte for stable all-solid-state lithium-based batteries

Synthetic control of structure and conduction properties in Na-Y-Zr-Cl solid electrolytes

NASICON-structured Na3.1Zr1.95Mg0.05Si2PO12 solid electrolyte for solid-state sodium batteries

Air-stable Li3InCl6 electrolyte with high voltage compatibility for all-solid-state batteries