Abstract:The limitations of conventional organic liquid electrolytes such as sodium dendrite growth, serious side reactions, and liquid leakage hinder the development of sodium–metal batteries (SMBs). In this work, a novel sodium–poly(tartaric acid)borate (NaPTAB) salt with low cost and environmental friendliness was synthesized by an aqueous phase synthesis method. NaPTAB was combined with poly(vinylidene fluoride)–hexafluoropropylene (PVDF–HFP) to form NaPTAB-SM, and then NaPTAB-SM was swelled in the PC solution to obtain a single sodium-ion conductor gel polymer electrolyte (GPE), denoted NaPTAB-SGPE. NaPTAB-SGPE has perfect thermal stability with an initial decomposition temperature of 345 °C, a satisfactory ionic conductivity of up to 0.94 × 10–4 S·cm–1 at room temperature, a wide electrochemical window as high as 5.2 V (vs Na+/Na) at 30 °C, and a high sodium-ion transference number of 0.91 at 60 °C. Except for these satisfying performances, the Na3V2(PO4)3/Na cells assembled with NaPTAB-SGPE present excellent charge–discharge performance and stable cycling capability at high temperatures (60 °C). They also exhibit superior cycling stability compared to the liquid electrolyte cells with 1 M NaClO4 (EC/PC, 1:1, v/v, and 5% fluoroethylene carbonate (FEC)). After cycling, NaF is generated on the polymer electrolyte membrane as observed by 23Na and 19F solid-state NMR, which is more likely responsible for the excellent charge–discharge stability and cycling performance of the battery. These results show that NaPTAB-SGPE is a great potential alternative for solid-state sodium batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01756?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01756</a>.Synthesis, characterization, and performances of materials; procedure for the one-step synthesis of NaPTAB, 1H NMR spectra, FTIR spectra, stress–strain curves, and EIS spectra; and related measurements and the calculated values of tNa+ (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01756/suppl_file/ae0c01756_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Investigation on tamarind seed polysaccharide biopolymer electrolyte doped with sodium nitrite and EC plasticizer for primary sodium battery

Synthesis, structural properties, thermal behavior, and electrical and electrochemical sensing performance of tamarind seed polysaccharide-lithium nitrate polymer electrolyte

Impact of lithium triflate (LiCF3SO3) salt on tamarind seed polysaccharide-based natural solid polymer electrolyte for application in electrochemical device

Tamarind gum based magnesium ion conducting polymer membrane for energy storage applications

Development of sodium-ion conducting biopolymer electrolyte membrane based on Agar-Agar with sodium perchlorate (NaClO4) using ethylene carbonate (EC) as a plasticizer for primary Na-ion battery

Development and characterization of biopolymer electrolyte based on gellan gum for the fabrication of solid-state sodium-ion battery

Novel Sodium–Poly(tartaric acid)Borate-Based Single-Ion Conducting Polymer Electrolyte for Sodium–Metal Batteries

Investigations on Na-ion conducting electrolyte based on sodium alginate biopolymer for all-solid-state sodium-ion batteries

Performance analysis of electrochemical cell using magnesium-doped tamarind gum polymer electrolyte

Influence of sodium salts on the phase and gelation behaviour of T1107 to be used as proposed polymer gel electrolyte

Sodium alginate incorporated with magnesium nitrate as a novel solid biopolymer electrolyte for magnesium-ion batteries

Synthesis and assessment of novel Na 2 S dispersed high performance nanocomposite gel polymer electrolyte intended for sodium batteries and electric double layer capacitors

Improving electrolyte performance: Nanocomposite solid polymer electrolyte films with cobalt oxide nanoparticles

Na3Zr2Si2PO12‐polymer composite electrolyte for solid state sodium batteries

Study on ionic conductivity, dielectric and electrochemical properties of solid polymer electrolyte for battery applications

Conductive Na3Sc2P3O12 Filler with Different Crystal Phases Modified Gel Polymer Electrolyte Membranes for Sodium Ions Batteries

Sodium-ion-conducting solid polymer electrolyte: temperature-dependent ionic parameters and solid-state polymer battery fabrication

Preparation and characterization of biopolymer electrolyte based on gellan gum with magnesium perchlorate for magnesium battery

Sodium ion conducting flame-retardant gel polymer electrolyte for sodium batteries and electric double layer capacitors (EDLCs)

Performance of solid-state Li-ion conducting battery using biopolymer electrolyte based on agar–agar/lithium chloride

Compositional dependence of electrochemical properties in biopolymer blend-based solid electrolytes doped with sodium perchlorate for EDLC applications