Abstract:Fabrication of the composite polymer electrolyte films via solution casting approach. A detailed account of the poly(vinylidene difluoride‐co‐hexafluoropropylene) (PVDF‐HFP)/succinonitrile (SN)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) based solid polymer electrolytes (SPEs) of various compositions is reported. SN is incorporated as plasticizer, while LiTFSI is employed as the source of lithium ions. Fourier transfer infrared (FTIR) spectroscopy reveals the formation of polar and electroactive γ crystal phase by PVDF in pristine PVDF‐HFP and the prepared SPE films. FTIR further confirms the interaction between the host polymer and the salt and between the salt and the plasticizer. The interaction between the salt and plasticizer suggests that SN not only offers the plasticization effect but also facilitates salt dissociation. The ion conductivity increases with increasing salt content up to 20 wt% but beyond that concentration a decline in ion conductivity is observed, which could be attributed to the ion pair association or cluster formation due to the excess salt concentration that reduces the availability of free ions and ultimately leads to the reduction in ion conductivity. After including SN in the SPE formulation, electrochemical impedance spectroscopy reveals a substantial increase in room temperature ion conductivity of the SPE from ~1.08 × 10−5 S cm−1 for pristine SPE with 20 wt% salt to ~2.7 × 10−4 S cm−1 for plasticized SPE with 40 wt% SN and 20 wt% salt. This is attributed to the plasticizing effect of SN that enhances ion mobility through the matrix and to the increased charge carrier concentration (SN facilities salt dissociation). The fabricated SPEs exhibit a significant enhancement in ion conductivity with increasing temperature and the maximum ion conductivity of 1.1 × 10−3 S cm−1 is attained at 393 K by plasticized SPE with 40 wt% SN content. The ion conductivity of all the prepared SPEs follows the temperature dependent Arrhenius behavior, suggesting the thermally activated ion hopping mechanism of ionic conduction. Further, the plasticized SPEs display near unity ion transference number indicating the predominance of the ionic mode of conduction. The dielectric and electric modulus analysis reveal a faster relaxation phenomenon and hence higher ion conductivity of the prepared SPEs with increasing salt and plasticizer content.

Study on ionic conductivity, dielectric and electrochemical properties of solid polymer electrolyte for battery applications

Sodium-ion-conducting solid polymer electrolyte: temperature-dependent ionic parameters and solid-state polymer battery fabrication

Mechanical properties and ionic conductivity of biodegradable materials in solid polymer electrolyte

Novel solid polymer electrolyte based on PMMA:CH3COOLi effect of salt concentration on optical and conductivity studies

An Sodium Bis(trifluoromethanesulfonyl)imide-based Polymer Electrolyte for Solid-State Sodium Batteries

High Ionic Conductivity of Composite Solid Polymer Electrolyte Via in Situ Synthesis of Monodispersed SiO2 Nanospheres in Poly(ethylene Oxide).

Poly(β‐amino ester) based solid polymer electrolytes for lithium‐ion batteries

Na3Zr2Si2PO12‐polymer composite electrolyte for solid state sodium batteries

Solid Polymer Electrolytes: Ion Conduction Mechanisms and Enhancement Strategies

A Flexible Solid Polymer Electrolyte based Polymerized Ionic Liquid for High Performance Solid‐State Batteries

Effect of succinonitrile on the structural, ion conductivity, and dielectric properties of PVDF‐HFP based solid polymer electrolytes

High Performance Ternary Solid Polymer Electrolytes Based on High Dielectric Poly(vinylidene fluoride) Copolymers for Solid State Lithium-Ion Batteries

Organic Ionic Plastic Crystal-Poly(ethylene oxide) Solid Polymer Electrolytes: Application in All-Solid-State Lithium Batteries

Potential of UV-Curable Poly(Glycidyl Methacrylate-co-Ethyl Methacrylate)- Based Solid Polymer Electrolyte For Lithium Ion Battery Application

Enhancing Ionic Conductivity, Mechanical Stibility and Electrochemical Properties Simultaneously by Integrating POSS-PEG13.3 Hybrid Nanoparticles into PEO-NaClO4 Solid Polymer Electrolytes

Synergistic Combination of Ether-Linkage and Polymer-in-Salt for Electrolytes with Facile Li + Conducting and High Stability in Solid-State Lithium Batteries

Solid Polymer Electrolyte Comprised of Lithium Salt/ether Functionalized Ammonium-Based Polymeric Ionic Liquid with Bis(fluorosulfonyl)imide

Electronegativity‐Induced Single‐Ion Conducting Polymer Electrolyte for Solid‐State Lithium Batteries

Studies on the Ion States and Ion Transport Mechanism of Solid Polymer Electrolytes

Influence of solid polymer electrolyte preparation methods on the performance of (PEO–PMMA)–LiBF4 films for lithium-ion battery applications

PEO based polymer-ceramic hybrid solid electrolytes: a review