Abstract:The limitations of conventional organic liquid electrolytes such as sodium dendrite growth, serious side reactions, and liquid leakage hinder the development of sodium–metal batteries (SMBs). In this work, a novel sodium–poly(tartaric acid)borate (NaPTAB) salt with low cost and environmental friendliness was synthesized by an aqueous phase synthesis method. NaPTAB was combined with poly(vinylidene fluoride)–hexafluoropropylene (PVDF–HFP) to form NaPTAB-SM, and then NaPTAB-SM was swelled in the PC solution to obtain a single sodium-ion conductor gel polymer electrolyte (GPE), denoted NaPTAB-SGPE. NaPTAB-SGPE has perfect thermal stability with an initial decomposition temperature of 345 °C, a satisfactory ionic conductivity of up to 0.94 × 10–4 S·cm–1 at room temperature, a wide electrochemical window as high as 5.2 V (vs Na+/Na) at 30 °C, and a high sodium-ion transference number of 0.91 at 60 °C. Except for these satisfying performances, the Na3V2(PO4)3/Na cells assembled with NaPTAB-SGPE present excellent charge–discharge performance and stable cycling capability at high temperatures (60 °C). They also exhibit superior cycling stability compared to the liquid electrolyte cells with 1 M NaClO4 (EC/PC, 1:1, v/v, and 5% fluoroethylene carbonate (FEC)). After cycling, NaF is generated on the polymer electrolyte membrane as observed by 23Na and 19F solid-state NMR, which is more likely responsible for the excellent charge–discharge stability and cycling performance of the battery. These results show that NaPTAB-SGPE is a great potential alternative for solid-state sodium batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01756?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01756</a>.Synthesis, characterization, and performances of materials; procedure for the one-step synthesis of NaPTAB, 1H NMR spectra, FTIR spectra, stress–strain curves, and EIS spectra; and related measurements and the calculated values of tNa+ (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01756/suppl_file/ae0c01756_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Characterization of biodegradable solid polymer electrolyte system based on agar-NH4Br and its comparison with NH4I

Performance of solid-state Li-ion conducting battery using biopolymer electrolyte based on agar–agar/lithium chloride

Poly(olefin)-Based Anion Exchange Membranes Prepared Using Ziegler–Natta Polymerization

Development of sodium-ion conducting biopolymer electrolyte membrane based on Agar-Agar with sodium perchlorate (NaClO4) using ethylene carbonate (EC) as a plasticizer for primary Na-ion battery

Study of proton-conducting polymer electrolyte based on K-carrageenan and NH4SCN for electrochemical devices

Ion transport properties and performance of gellan gum based composite polymer membrane electrolytes in proton battery and PEMFC applications

Development and characterization of biopolymer electrolyte based on gellan gum for the fabrication of solid-state sodium-ion battery

Electrolytic Performance of Sodium Alginate-Poly Vinyl Alcohol Matrix with Ammonium Bromide for Proton Conduction: Applications in Electrochemical Systems

Studies on ionic conductivity, linear and non-linear optical properties of ecofriendly methyl cellulose: sodium bromide based solid polymer blend electrolytes

Influence of binary lithium salts on 49% poly(methyl methacrylate) grafted natural rubber based solid polymer electrolytes

Studies of Circuit Design, Structural, Relaxation and Potential Stability of Polymer Blend Electrolyte Membranes Based on PVA:MC Impregnated with NH4I Salt

Conducting biopolymer electrolyte based on pectin with magnesium chloride salt for magnesium battery application

Study of PVAc-PMMA-LiCl polymer blend electrolyte and the effect of plasticizer ethylene carbonate and nanofiller titania on PVAc-PMMA-LiCl polymer blend electrolyte

Flexible magnesium-ion-conducting solid poly-blend electrolyte films for magnesium-ion batteries

Dextran from Leuconostoc mesenteroides-doped ammonium salt-based green polymer electrolyte

Preparation and characterization of proton conducting polymer blend electrolytes (PVC/PMMA/NH4SCN)

Novel Sodium–Poly(tartaric acid)Borate-Based Single-Ion Conducting Polymer Electrolyte for Sodium–Metal Batteries

Bio-host pectin complexed with dilithium borate based solid electrolytes for polymer batteries

Ionic conduction and charge carrier relaxation in chitosan acetate based solid biopolymer electrolyte embedded with LiClO4

Conductivity and Transport Properties Study of Plasticized Carboxymethyl Cellulose (CMC) Based Solid Biopolymer Electrolytes (SBE)

Preparation and Characterization of PVDF-HFP/MG49 Based Polymer Blend Electrolyte