Abstract:Biopolymer Gellan gum (GG) incorporated with ammonium iodide (NH4I) salts and inorganic filler nano-TiO 2 improved the ion transport facility in the salt-polymer matrix. The crystalline/amorphous nature of the membranes and the presence of n-TiO 2 are evident from XRD analysis. The vibration modes corresponding to the characteristic functional groups and bonding interactions within the polymer matrix and incorporated filler materials present in the as-prepared membranes were analyzed using FTIR technique respectively. The ion transport parameters such as ionic conductivity (σ), diffusion coefficient (D), and mobility (μ), were studied using Ac impedance, transference number measurement, and FTIR deconvolution. The biopolymer membrane with the composition, 1 g GG: 0.3 M.wt% of NH 4 I (GGAI-3) shows the highest ionic conductivity of 2.65 ± 0.03×10 −3 S/cm and on addition of 0.1 M.wt% of n-TiO 2 (GGAIT-1) the increase in ionic conductivity of 4.07 ± 0.02×10 −2 S/cm was observed. The H1NMR studies help in understanding the mobility of charge carriers upon their chemical shifts. The glass transition temperature values of the as-prepared membranes were determined using DSC studies. The morphological change on the surface of the GG polymer membrane due to the addition of NH 4 I and n-TiO 2 were analyzed using the SEM technique. The thermal, mechanical, and chemical stability of the highest ion-conducting biopolymer and composite polymer membranes were assessed using TGA, mechanical stability tests, and chemical stability tests. The IEC test exhibits the number of exchangeable ions in the polymer matrix. Utilizing the GGAI-3 and GGAIT-1 membranes as electrolytes, proton batteries were constructed and observed to have the pseudocapacitive behaviour; as the electrodes experience surface limited redox reaction at the electrode-electrolyte interface. The PEMFC cell using the GGAI- 3 and GGAIT-1 as proton exchange membrane exhibits the OCV of 646 mV and 682 mV respectively. Their performances were analyzed using the I-V polarization curve resulted with the power density of 0.14 mW/cm 2 and 0.34 mW/cm 2 respectively.

Ion transport properties and performance of gellan gum based composite polymer membrane electrolytes in proton battery and PEMFC applications

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Preparation and Properties of Gel Membrane Containing Porous PVDF-HFP Matrix and Cross-Linked PEG for Lithium Ion Conduction

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

Development and characterization of biopolymer electrolyte based on gellan gum for the fabrication of solid-state sodium-ion battery

Preparation of Halloysite/polyvinylidene Fluoride Composite Membrane by Phase Inversion Method for Lithium Ion Battery

Preparation and characterization of a novel microporous PE membrane supporting composite gel polymer electrolyte

Protic ionic liquid-based gel polymer electrolyte: structural and ion transport studies and its application in proton battery

A Porous Gel-Type Composite Membrane Reinforced by Nonwoven: Promising Polymer Electrolyte with High Performance for Sodium Ion Batteries

Characterization of biodegradable solid polymer electrolyte system based on agar-NH4Br and its comparison with NH4I

Performance of solid-state Li-ion conducting battery using biopolymer electrolyte based on agar–agar/lithium chloride

Unlocking Mechanism of Anion and Cation Interaction on Ion Conduction of Polymer Based Electrolyte in Metal Batteries

Preparation and Characterization of GG-LiCF3SO3-DMSO Gel Polymer Electrolyte for Potential Lithium-Ion Battery Application

Probing the Efficiency of PPMG-Based Composite Electrolytes for Applications of Proton Exchange Membrane Fuel Cell

Development of sodium-ion conducting biopolymer electrolyte membrane based on Agar-Agar with sodium perchlorate (NaClO4) using ethylene carbonate (EC) as a plasticizer for primary Na-ion battery

Imidazolium-grafted Graphene Oxide Via Free Radical Polymerization: an Efficient and Simple Method for an Interpenetrating Polymer Network As Electrolyte Membrane

Studies of Circuit Design, Structural, Relaxation and Potential Stability of Polymer Blend Electrolyte Membranes Based on PVA:MC Impregnated with NH4I Salt

Activation of Passive Nanofillers in Composite Polymer Electrolyte for Higher Performance Lithium-Ion Batteries

Advances in ionogels for proton-exchange membranes